Neon Fuel Injectors
Senior Member
Joined: Feb 2012
Posts: 905
Likes: 8
From: New Hampshire
Year: 1998
Model: Cherokee
Engine: 4.0L I6
I'm doing my exhaust 1st. It's getting louder by the day... Then onto the Throttle Body, because I'm curious to see how it would respond to the stock injectors. After that, 703's.
Originally Posted by KJamesJR
I'm doing my exhaust 1st. It's getting louder by the day... Then onto the Throttle Body, because I'm curious to see how it would respond to the stock injectors. After that, 703's.
did the swap to 703s 2 days ago. runs smooooth.Had a few problems. A special tool is needed to disconnect the fuel line on a 96. I did the swap with the fuel line still attached. The front injector leaked with three diff o rings . The 4th time I stuck the 703 into the fuel rail & then pressed the whole deal into the intake manifold Did the trick
Newbie
Joined: May 2012
Posts: 10
Likes: 0
From: Maine
Year: 1997
Model: Cherokee
Engine: 4.0L inline 6
My roomate bought a 97 jeep cherokee sport, it has a Jet Performance Chip installed already. He disconnected it and showed how easy it is to install/remove. Is the PCM reset required if you remove and re-install said part? (BTW. having multiple issues, electrical and since Sunday - will not start. cleaned battery terminals and checked STARTER relay (good).
Just curious if he did that and didn't know any better?
Thanks
Senior Member
Joined: Jan 2012
Posts: 559
Likes: 0
From: FL
Year: 1991
Model: Cherokee
Engine: 4.0L H.O Power Tech
Does anyone have a part number for these? I thought I would just order mine from advanced auto and it said they were $94?! Is that for a set of 4(like would be required for a Dodge Neon) or individual?
Originally Posted by jeepheep1
Does anyone have a part number for these? I thought I would just order mine from advanced auto and it said they were $94?! Is that for a set of 4(like would be required for a Dodge Neon) or individual?
So it's finally come up on my list. Is it just ordering the right number Neon injectors and a simple disconnect/plug in? Or do I need a new rail or anything? Mine's a 92, might I have to reset the PCM if I experience poor performance, or is that for the later model XJs? I also know a few people sell the injectors off CF, so I'm going to get in touch with them first, but want to know if there's anything else I need or need to know before I do this.
Cheers
Cheers
Last edited by rainandsun; Aug 27, 2013 at 01:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



