need advice
08-08-2012, 01:20 PM
#1
Newbie
Thread Starter
Join Date: Aug 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
need advice
hey i just bought a 1990 xj and i have a few questions i have a dodge 360 motor laying around is it possaible to fit one of them into the xjs and second cheap lift kits the ones i have found are 1200 or better i hope there is cheaper ones if so plz help lol i wan to bump it up 3 inches
08-08-2012, 04:54 PM
#2
CF Veteran
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
You placed this in the "Jeep Builds" section. This section is meant for documenting work your doing to your Jeep. Questions typically don't get answered here. Please keep that in mind when creating new threads, we have separate sections for a reason. So I'm moving this to Chat.
As for your questions...
Yes, a 360 can fit. But it won't be easy, and it won't be a direct swap. Lots will be involved, time, money, parts and tools. If you have to ask this vague of a question, it'd be in your beat interest to do some research and see what other folls have done. FrankZ from Serious Offroad swapped in a GM 5.3l, he documented it on NAXJA.org. there is also a member who swapped in a Supra 2JZ motor. Those would be great starts for you.
As for your lift, a 3" is very easy and cheap. There are several kits made by several manufacturers, in a wide range of parts. You could also do a 'junk yard' lift, which would involve some work on your part, we even have a dedicated thread here for info on JY parts.
Check it out.
As for your questions...
Yes, a 360 can fit. But it won't be easy, and it won't be a direct swap. Lots will be involved, time, money, parts and tools. If you have to ask this vague of a question, it'd be in your beat interest to do some research and see what other folls have done. FrankZ from Serious Offroad swapped in a GM 5.3l, he documented it on NAXJA.org. there is also a member who swapped in a Supra 2JZ motor. Those would be great starts for you.
As for your lift, a 3" is very easy and cheap. There are several kits made by several manufacturers, in a wide range of parts. You could also do a 'junk yard' lift, which would involve some work on your part, we even have a dedicated thread here for info on JY parts.
Check it out.
08-08-2012, 05:52 PM
#3
Senior Member
Join Date: Jan 2012
Location: Tennessee
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
You placed this in the "Jeep Builds" section. This section is meant for documenting work your doing to your Jeep. Questions typically don't get answered here. Please keep that in mind when creating new threads, we have separate sections for a reason. So I'm moving this to Chat.
As for your questions...
Yes, a 360 can fit. But it won't be easy, and it won't be a direct swap. Lots will be involved, time, money, parts and tools. If you have to ask this vague of a question, it'd be in your beat interest to do some research and see what other folls have done. FrankZ from Serious Offroad swapped in a GM 5.3l, he documented it on NAXJA.org. there is also a member who swapped in a Supra 2JZ motor. Those would be great starts for you.
As for your lift, a 3" is very easy and cheap. There are several kits made by several manufacturers, in a wide range of parts. You could also do a 'junk yard' lift, which would involve some work on your part, we even have a dedicated thread here for info on JY parts.
Check it out.
As for your questions...
Yes, a 360 can fit. But it won't be easy, and it won't be a direct swap. Lots will be involved, time, money, parts and tools. If you have to ask this vague of a question, it'd be in your beat interest to do some research and see what other folls have done. FrankZ from Serious Offroad swapped in a GM 5.3l, he documented it on NAXJA.org. there is also a member who swapped in a Supra 2JZ motor. Those would be great starts for you.
As for your lift, a 3" is very easy and cheap. There are several kits made by several manufacturers, in a wide range of parts. You could also do a 'junk yard' lift, which would involve some work on your part, we even have a dedicated thread here for info on JY parts.
Check it out.
Thread
Thread Starter
Forum
Replies
Last Post
jpmarine6786
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
43
10-22-2023 04:16 AM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)