Do those 31's rub with a 2in. boost?

 

Only on tight turns because of the offset of the ravine's. If I had any after market wheels I doubt they would.



Looking for new shocks too to try to gain a little more flex

 

You could adjust your steering stops

 

That's what I was planning in doing when my adjustable track bar shows up

 

I have 3 in and 31s, I say it's a pretty agressive stance

 

1.) 2.5 inch lift (ProComp leaf packs and coil spacers, total cost under $300)

2.) Black wheels, mine are powder coated, yours can be Plasti Dipped.

3.) More aggressive tires (P235/75-15 Goodyear Wrangler's shown)







Off-road lights and Plasti Dip stripes

 

cheap thing to do if you dont mind cutting 1) CUT OFF PLASTIC UNDER FRONT BUMPER ...MAKE EVEN cut ABOVE TOP OF BUMPER...2)GET WHEEL SPACERS OFF EBAY, ONE INCH iS WHAT I GOT, so tires stick out Looks AGGRESSIVE (BUT i needed IT DONE) 3)Or take off Fender flares, if YOUR state ALLOWS and CUT Off OR BEND UP EXTRA METAL...(Makes it look lifted!)

 

The spacers are supposed to be mounted with the isolator below them, not above like you've got, I mounted mine like you have yours, after about 3 years the spacers disintegrated.

 

Okay, thank you. I'm installing V8 ZJ springs on Sunday so I'll switch them around when I've got it apart. I only installed the spacers last month.

 

if you ride bikes you'll know what it means. not sure if either of you guys ride or not lol

 

I have a YZF 600, but you probably mean dirt bikes.

 

Tires are everything! Throw away the car wash sponge, off set rims to stick out from under the fenders, and mount a kid with a rifle on top. Works every time.

 

is that plywood on the roof? You better not just be standing on the roof, xj roofs are wimpy

 

what would an old style xj look like without flares? I don't want to cut

 

no, LOL, that's not plywood on the roof. It is a stick to move rattlesnakes out of the way.
If you want an aggressive look you can't worry about a few little kid tracks on the roof.
How about the optional ax handle rear hatch helper on this one?