Looking for help on switching rears
#1
"CF Moderator"
Thread Starter
Join Date: Sep 2008
Location: N.J. Shore Area
Posts: 3,045
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: l6 HO
Looking for help on switching rears
Hi everyone, I am handicapped (missing a leg and lung...lol) and I need someone to help with switching out my rear (chryco 8.25) that's in my garage with the one that's in my jeep now ( also 8.25 that's howling bad) I have a locker that needs to go in (lock rite) and the thrust washer from the rear that's in there now needs to be put in other rear along with the brakes and backing plates and axles.I already put in new axle bearings and seals but I'm pretty limited being in a wheelchair, I would appreciate any help from anyone. This is my DD. Any questions just PM or email me plz...Thx ...Joe.
PS I'm in jersey in zip 08721 near the shore.
PPS I have the knowledge but not the health...lol.
PS I'm in jersey in zip 08721 near the shore.
PPS I have the knowledge but not the health...lol.
Last edited by TrekkerJmm; 06-27-2010 at 09:24 AM.
#2
CF Veteran
Join Date: May 2008
Location: Bristol,Pa
Posts: 5,188
Likes: 0
Received 6 Likes
on
6 Posts
Year: 94
Model: Cherokee
Engine: 4.0L
Joe, got your PM. Will your Jeep be ok to get to my side of the river? Can you drop it off and i'll get the swap done for ya?
I have a Van in driveway that will be done and gone tonight, can start on your asap.
I'll give you a call later.
I have a Van in driveway that will be done and gone tonight, can start on your asap.
I'll give you a call later.
Trending Topics
#8
"CF Moderator"
Thread Starter
Join Date: Sep 2008
Location: N.J. Shore Area
Posts: 3,045
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: l6 HO
I want to personally thank all of you who are helping or would like to help me with this. I used to be a mechanic and would still be if I didn't live the "Hard life" (too much partying and smokin too many cigg's) so now I am paying for it. John (Overland_XJ) is one of the best guys I know for helping as much as he does for me. Without him I don't know how I would get my heep fixed ... Thank you again John...Joe
#13
CF Veteran
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
Hey OverLand
you get that no-slip in?
or you just end up putting the spiders back in?
was just curious as i ran into your thread on NAXJA.....
anyway sweet deal on helping the fellow Jeeper!
keep up the AWESOME work!
you get that no-slip in?
or you just end up putting the spiders back in?
was just curious as i ran into your thread on NAXJA.....
anyway sweet deal on helping the fellow Jeeper!
keep up the AWESOME work!
#14
CF Veteran
Join Date: May 2008
Location: Bristol,Pa
Posts: 5,188
Likes: 0
Received 6 Likes
on
6 Posts
Year: 94
Model: Cherokee
Engine: 4.0L
Spyin on me eh..
Joe bought a second hand Lockright (new) that turned out to be a no-slip missing 8 springs. I swapped everything to a new housing and reinstalled the old axles spiders to get him on the beach this holiday.
Locker can be installed later once parts are sourced.
Joe bought a second hand Lockright (new) that turned out to be a no-slip missing 8 springs. I swapped everything to a new housing and reinstalled the old axles spiders to get him on the beach this holiday.
Locker can be installed later once parts are sourced.