Just curious about tire size on rubicon wheels
Thread Starter
Seasoned Member
Joined: Jan 2012
Posts: 433
Likes: 1
From: Yuma, AZ....yes the 3:10 came here
Year: 1998
Model: Cherokee
Engine: 4.0
Just curious about tire size on rubicon wheels
Whats the largest/widest tire you can fit on rubicon wheels and a 6 inch lift with no wheel spacers?
CF Veteran
Joined: Dec 2010
Posts: 9,897
Likes: 2
From: shawnee,ks
Year: 1993
Model: Cherokee
Engine: 4.0
Like a 35x10, they have a lot of backspacing something like 5 or 5.5 inches so spacers would probably be needed anyway
And if they are off a jk then you will need adapters
And if they are off a jk then you will need adapters
CF Veteran
Joined: Jan 2010
Posts: 5,482
Likes: 25
From: Virginia Beach by way of Michigan
TJ Moabs (this us their actual name, not Rubicons. A lot of people call them Rubicons because they came on the Rubicon edition) have 5" of BS. Without spacers the widest you can go is a 11.5" wide without rubbing on the LCA's. as far as diameter, it all depends on how much trimming you want to do to keep it from rubbing on the fenders.
JK Moabs are 6.25" BS, but they have a different lug pattern (5x5 vs the XJ's 5x4.5) so you'll need wheel adapters which will push the wheel out further, allowing you to run at least a 11.5" depending on how wide of an adapter you get.
JK Moabs are 6.25" BS, but they have a different lug pattern (5x5 vs the XJ's 5x4.5) so you'll need wheel adapters which will push the wheel out further, allowing you to run at least a 11.5" depending on how wide of an adapter you get.
Last edited by no rdplz; Mar 19, 2012 at 09:18 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Jethro4days
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Sep 5, 2015 08:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)