Im getting the Death Wobble
#1
Member
Thread Starter
Join Date: Feb 2015
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0l v6
Im getting the Death Wobble
Ok so I have a 2001 cherokee sport, it is completely stock but I plan on lifting it 3 inches in the next couple of months. Today when I was driving on the freeway I got the DW. My tires are balance. What else could this be? I want to upgrade it when I do the lift.
#2
Seasoned Member
Join Date: Aug 2013
Location: Connecticut
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: I6 4.0
Too many things. Lifting it actually might fix this because youll be replacing parts that are potentially bad. Start at the trackbar I guess. Get aligned.
#4
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
If your not sure of what's causing it take it somewhere and pay to find out exactly what it is. My guess is that nothing in most entry level 3" lift kits will take care of it.
It must be repaired and any other weak, worn, bad front end parts replaced "BEFORE" any lift is started. If you do any problems will only be made worse with the lift.
It must be repaired and any other weak, worn, bad front end parts replaced "BEFORE" any lift is started. If you do any problems will only be made worse with the lift.
#5
Seasoned Member
Join Date: Jul 2014
Location: Albuquerque
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L Inline 6
Was it DW or bump steer? There is a big difference.
Everything I know about Death Wobble goes to the track bar, specifically you need to beef up/replace the track bar bracket on the upper end. Check out Kevin's Off Road and their track bar conversion
I don't have this exact set up, but I have a similarly burly/overbuilt track bar mount with some high durometer bushings and a custom overbuilt tie rod and have no DW with 35's. I get bumpsteer, but not DW.
Everything I know about Death Wobble goes to the track bar, specifically you need to beef up/replace the track bar bracket on the upper end. Check out Kevin's Off Road and their track bar conversion
I don't have this exact set up, but I have a similarly burly/overbuilt track bar mount with some high durometer bushings and a custom overbuilt tie rod and have no DW with 35's. I get bumpsteer, but not DW.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
50
12-26-2023 09:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)