Hubcap question?
Thread Starter
Junior Member
Joined: Aug 2011
Posts: 88
Likes: 0
From: Batavia Illinois
Year: 1993
Model: Cherokee
Engine: 4.0
Just a quick question, my jeep has the normal 5 spoke rims but I have lost a couple centercaps. Do you think I could replace the center pieces with some cragars?

and use these

and use these
CF Veteran
Joined: Dec 2011
Posts: 3,237
Likes: 1
From: albany, new york
Year: 1988
Model: Cherokee
Engine: i6
Junior Member
Joined: Apr 2012
Posts: 84
Likes: 0
From: Memphis, Tennessee
Year: 2000
Model: Cherokee
Engine: 4.0 Liter, Inline 6
Trending Topics
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Best deal I see...
http://www.ebay.com/itm/jeep-center-...755e95&vxp=mtr
The cragar center caps rust in no time and look like crap anyway.
http://www.ebay.com/itm/jeep-center-...755e95&vxp=mtr
The cragar center caps rust in no time and look like crap anyway.
Junior Member
Joined: Feb 2012
Posts: 51
Likes: 0
From: Stillwater MN
Year: 1999
Model: Cherokee
Engine: 4.0 l
i agree, these center cap replacements are way too pricey, especially since i only need one. And I have yet to see one with mounting hardware which would probably be a pain to find.
Senior Member
Joined: Dec 2010
Posts: 588
Likes: 1
From: Peterborough, Ontario, Canada
Year: 1998
Model: Cherokee
Engine: 4.0L
For the guys needing only 1 or 2 of these caps, try posting wanted ads on here, your local classfied site, and check on ebay.. usually you can get them pretty cheap (I've bought 2 full sets, so 8 of these, for under $40 total.. one set is flat black, the other stock). Don't worry about not having the original hardware as they're just 3 little bolts, and almost anything the same size will work (I used 8x3/4 wood screws to mount mine)


Junior Member
Joined: Feb 2012
Posts: 51
Likes: 0
From: Stillwater MN
Year: 1999
Model: Cherokee
Engine: 4.0 l
For the guys needing only 1 or 2 of these caps, try posting wanted ads on here, your local classfied site, and check on ebay.. usually you can get them pretty cheap (I've bought 2 full sets, so 8 of these, for under $40 total.. one set is flat black, the other stock). Don't worry about not having the original hardware as they're just 3 little bolts, and almost anything the same size will work (I used 8x3/4 wood screws to mount mine)
I dont know how you found them that cheap!! lucky, I have been scouring ebay for months and the cheapest i have seen is $25 for one.
Senior Member
Joined: Dec 2010
Posts: 588
Likes: 1
From: Peterborough, Ontario, Canada
Year: 1998
Model: Cherokee
Engine: 4.0L
Also if someone was actually worried about not having the factory mounting screws, they can have all the ones I have as I have no use for them.
Thread
Thread Starter
Forum
Replies
Last Post
Kydude7
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
Sep 20, 2015 06:35 AM
codykrr
Modified XJ Cherokee Tech
9
Sep 18, 2015 01:27 PM
mach3lude
Modified XJ Cherokee Tech
17
Sep 10, 2015 02:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



