it is on 33 inch tires with no cutting of the fenders

 

I'm guessing, of course, but since it is on 33's with stock fenders I'm going to say at least 3.5, probably 4.

 

4.5"-5.5". Just my guess. You could measure center of wheel to flare or axle tube to uniframe rail. I don't remember what stock is but search this site and it will tell you or somebody on here will chime in with stock measurements.

 

k cuz i bought it and it was running 31s and i added 2 inch of lift and 33s but it still looks small

 

You can run 31's on a stock XJ, but that is certainly more than 2 inches of lift so when you got it, there was lift there.

Did you add lift blocks? If you did then I'm going to say it probably had 3-3.5in kit on it and you added another two.

 

im pretty sure from the middle of the wheels to the flare is 17 inches stock in the front and 17.5 in the back. just measure it out

 

i did blocks tempoary in the rear and just ajusted the front end its the accos lift. i think thats how its spelled.

 

Blast from my past may help

https://www.cherokeeforum.com/f5/how...as-lift-72522/

 

I will up date it with the measurements as soon as i find a tape measure

 

looks like 5.5 or 6 inch lift to me. It would probably be less if the fenders were trimmed. but with stock fenders and that much clearance on 33s definitely at least 5.5inches.

 

Im going to say 5 to 5.5 to me

 

I agree, in the 5ish range (4.5-5.5)

 

Looks to me like a 4.5-5.5 also.

 

i did som measuring and it is 5.5-6 inch. thanks everyone