Originally Posted by robdiddy

I'm cool with my sylvania xtra vision and fog setup.. I just was on a dirt road and seen a deer before he crossed. I can't even run my fogs on my bumper while driving without people bright flashing me.

Originally Posted by 1996XJSport

Fogs definitely do make a difference. I have KCs on the bumper and KCs on the roof rack. I turn everything on and blind my friends when I see them on the road at night

Originally Posted by robdiddy

can't wait to get my roof rack setup

Originally Posted by 1996XJSport

Are you building one or buying one? You can build one for around $40 which is pretty awesome lol.

Originally Posted by sm99eagle

Dude, where did you get them at and how much were they..that'
s totally sick!

Originally Posted by hal93

Reall talk man that is hella tight. I want that setup asap

transmitted to Cherokee Forum using my Telekinetic abilities!!

Originally Posted by 1996XJSport

I dont think the angel eyes can be wired into the parking lights unless you want them to blink when you use the turn signal.

Originally Posted by 1996XJSport

No problem man. The angel eyes themselves are small, round fluorescent tubes. They are encased in a plastic ring for protective reasons, as they are VERY fragile and non-flexible.

The angel eyes have two wires with a connector at the end of them. the connector then goes to a small ballast which has a positive and negative lead. I don't think the angel eyes are able to wire into the parking lights as the parking lights are only two wires and also operate the turn signals. You could wire it in, but your angel eye would blink whenever you hit the turn signal lol.

Personally, I would wire them to a fog light switch or something. As for installing the angel eyes so they go around your headlight projectors, I would just attach them around the projector shroud using either some plastic model glue, or some clear silicone. Both methods work

Originally Posted by hal93

Killer man. Check out the setup that I want to do and tell
Me if I will have enough room for them in the regular diamond cut housings. ........
Gatling gun 2.0 shrouds
Morimoto d2s bi-xeon. Projectors
Ccfl angel eyes
6000k bulbs


Last one is just a retrofit diamond cut but looks nice.

transmitted to Cherokee Forum using my Telekinetic abilities!!

Originally Posted by 1996XJSport

Nice setup. I'd run 5000k if I were you, I had 6000k before and it wasn't as bright. Everything should fit inside the housings, but you might have to do some trimming on the shrouds to get them to fit. I had to trim my shrouds quite a bit lol.

Originally Posted by hal93

Ok. What do u mean by trim. Off the bottom or insode or what.

transmitted to Cherokee Forum using my Telekinetic abilities!!

Originally Posted by sam24th

Careful wiring up the angel eyes. I shorted my turn signal out somehow and now it doesnt blink and I dont know how to fix it lol.

Originally Posted by hal93

How do the projectors stay secure in the housing. Do u need to screw them in place.

transmitted to Cherokee Forum using my Telekinetic abilities!!

Originally Posted by sam24th

Careful wiring up the angel eyes. I shorted my turn signal out somehow and now it doesnt blink and I dont know how to fix it lol.