Have a little work for the jeep, thanks to a telephone pole.
#1
Seasoned Member
Thread Starter
Join Date: Jun 2010
Location: Mineral Ridge, Ohio
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 I6
Have a little work for the jeep, thanks to a telephone pole.
Ok well I had one of the rare winter occurrences in my ZJ this morning hit a little patch of ice while turning and slid sideways into a telephone pole.
Smashed the grill up pretty good sent the fog light right through it.
To make matters worse there was some real thick steel ( I think) cord looking like it was anchoring the pole to the ground. Well in order to get away from the pole I had to put it in reverse and back straight up well the cord took off the drivers side view and the body panels on the side door.
Since I know the sideview is mainly plastic I'm gonna superglue it on. Its likely that I'll be tearing off the rest of the body panels and putting rhinoliner in their place. My only problem is that where the panels attach there are these little nail like things sticking out to hold the panels on, should I just grind those of sand it then rhinoline over it.
I'm not sure about what to do with the grill. And I could really use a new set of tires mine don't seem to grip worth crap
Smashed the grill up pretty good sent the fog light right through it.
To make matters worse there was some real thick steel ( I think) cord looking like it was anchoring the pole to the ground. Well in order to get away from the pole I had to put it in reverse and back straight up well the cord took off the drivers side view and the body panels on the side door.
Since I know the sideview is mainly plastic I'm gonna superglue it on. Its likely that I'll be tearing off the rest of the body panels and putting rhinoliner in their place. My only problem is that where the panels attach there are these little nail like things sticking out to hold the panels on, should I just grind those of sand it then rhinoline over it.
I'm not sure about what to do with the grill. And I could really use a new set of tires mine don't seem to grip worth crap
#2
Member
Join Date: Oct 2010
Location: Stanwood, Wa.
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
sorry to hear, thats not fun! Should just say you got onto a good trail and were bouncin off trees haha.
sorry for the damage no fun, but hey you can do some customizing now right? Not all is at a loss
sorry for the damage no fun, but hey you can do some customizing now right? Not all is at a loss
#3
Seasoned Member
Thread Starter
Join Date: Jun 2010
Location: Mineral Ridge, Ohio
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 I6
#4
Seasoned Member
Thread Starter
Join Date: Jun 2010
Location: Mineral Ridge, Ohio
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 I6
If anybody has torn their body panels off could you please post pics of how it looks and how you did it
#5
Member
Join Date: Oct 2010
Location: Stanwood, Wa.
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
just get the whole thing redone. dont try and match it, sometimes its cheaper to do the whole thing a new color. Just dont rhino line your entire thing!
Trending Topics
#8
Seasoned Member
Thread Starter
Join Date: Jun 2010
Location: Mineral Ridge, Ohio
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 I6
Ya I know that pole popped up out of nowhere lol it was just like hey I'm here to smash you up hope you don't mind. but in all seriousness I'm gonna be a lot more careful next time around. Hoping to get it fixed soon
#9
CF Veteran
Join Date: May 2010
Location: Fort Collins, CO
Posts: 3,405
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
Go to junkyard to get parts. I hit a guardrail last month (same story, patch of ice) and broke some stuff. When it gets warmer I will reform the fender and build a bumper, but $20 at the junkyard fixed my broken light bezel and turn signal lenses (both sides were broken when I got the Jeep, replaced both)
#10
Seasoned Member
Thread Starter
Join Date: Jun 2010
Location: Mineral Ridge, Ohio
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 I6
Ya thats what I'll probably end up doing, go with my grandpa to the junkyard and start digging for parts
Thread
Thread Starter
Forum
Replies
Last Post
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
04-10-2019 09:07 AM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-29-2015 06:42 AM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
08-27-2015 12:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)