First timer looking for some advice?
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
If I go with the green Classic, which I see no reason not to, I won't do a lift for awhile. It sports 16s already. So I wouldn't need my higher at that moment.
Also I realized these things drive like trucks. They remind me of the Ranger my father owned, and the hoods on these things is looooooong.
Also I realized these things drive like trucks. They remind me of the Ranger my father owned, and the hoods on these things is looooooong.
Yes, they drive like mini dump trucks.
That's really the most detailed of an explanation I can give. Again, my mind works in mysterious ways.
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Because I don't like the look of the standard tires, they're so small. But because those tires are already a little larger than stock, I wouldn't want to go ahead and lift it first thing.
That's really the most detailed of an explanation I can give. Again, my mind works in mysterious ways.
That's really the most detailed of an explanation I can give. Again, my mind works in mysterious ways.
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
You sure about that? Late model XJs were available with 16" rims but the tires are the same size. 225/70R16 instead of 225/75R15 or thereabouts. The sidewall is shorter but the tires are the same diameter.
Tires on the green one, at least to what I can see are 235/70R16s. Correct me if I'm wrong but those are bigger....
right? xD
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
225/75R15 = 28.3" diameter
225/70R16 = 28.4" diameter
235/70R16 = 29" diameter
http://www.onlineconversion.com/tire...conversion.htm
225/70R16 = 28.4" diameter
235/70R16 = 29" diameter
http://www.onlineconversion.com/tire...conversion.htm
225/75R15 = 28.3" diameter
225/70R16 = 28.4" diameter
235/70R16 = 29" diameter
http://www.onlineconversion.com/tire...conversion.htm
225/70R16 = 28.4" diameter
235/70R16 = 29" diameter
http://www.onlineconversion.com/tire...conversion.htm
Lots of people wheel stock Jeeps haha. Watch some vids on youtube and you'll see tons.
Beach Bum
Joined: Jul 2011
Posts: 6,123
Likes: 22
From: Cape Hatteras, North Carolina
Year: 2000 WJ
Model: Grand Cherokee
Engine: 4.0
I wheeled stock jeeps and a Datsun B-210 for many years. Went everywhere offroad, including places my lifted XJ would not fit. Until that final day..
Also, what happened? To be sure you didn't drive that there xD
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
He got stuck and then the area flooded quickly before he could get unstuck.
Mudding isn't good for any car, but people go mudding even in 2wd in the shallow stuff. Im sure you can find some mild trails/unkempt roads to have fun on in a stock Jeep. There's a reason people buy vehicles with the Jeep name. Because they're already capable and rugged from the factory haha. But if you don't feel comfortable wheeling stock that's okay too...snow wheeling, maybe? Your suspension doesnt take as much of a beating simply having fun plowing through deep cushions of snow I bet haha.
If you want to get wheeling asap, I'd focus on recovery points first, as they're comparatively cheap, especially if you have a trailer hitch receiver. They sell d ring shackles that fit right in the hitch reciever. You don't want to get stuck with nothing to pull you out by. Maybe check a junkyard for front hooks, too. Oh, and don't go wheeling alone. If you get stuck or lost while you're alone, it's not gonna be fun. Nobody should really wheel alone, but especially if they're new to it.
If you want to get wheeling asap, I'd focus on recovery points first, as they're comparatively cheap, especially if you have a trailer hitch receiver. They sell d ring shackles that fit right in the hitch reciever. You don't want to get stuck with nothing to pull you out by. Maybe check a junkyard for front hooks, too. Oh, and don't go wheeling alone. If you get stuck or lost while you're alone, it's not gonna be fun. Nobody should really wheel alone, but especially if they're new to it.
Mudding isn't good for any car, but people go mudding even in 2wd in the shallow stuff. Im sure you can find some mild trails/unkempt roads to have fun on in a stock Jeep. There's a reason people buy vehicles with the Jeep name. Because they're already capable and rugged from the factory haha. But if you don't feel comfortable wheeling stock that's okay too...snow wheeling, maybe? Your suspension doesnt take as much of a beating simply having fun plowing through deep cushions of snow I bet haha.
If you want to get wheeling asap, I'd focus on recovery points first, as they're comparatively cheap, especially if you have a trailer hitch receiver. They sell d ring shackles that fit right in the hitch reciever. You don't want to get stuck with nothing to pull you out by. Maybe check a junkyard for front hooks, too. Oh, and don't go wheeling alone. If you get stuck or lost while you're alone, it's not gonna be fun. Nobody should really wheel alone, but especially if they're new to it.
If you want to get wheeling asap, I'd focus on recovery points first, as they're comparatively cheap, especially if you have a trailer hitch receiver. They sell d ring shackles that fit right in the hitch reciever. You don't want to get stuck with nothing to pull you out by. Maybe check a junkyard for front hooks, too. Oh, and don't go wheeling alone. If you get stuck or lost while you're alone, it's not gonna be fun. Nobody should really wheel alone, but especially if they're new to it.
Mmm, snow wheeling, gonna have to try that if we get any this year.


