New guy with a newbee question. I have a 94" xj needs passenger front fender, I as well have 98' wrecked xj with good Passenger fender. Being new to these critters was wondering if the 98' front fender will work on the 94'. Thanks much and howdy to all.

 

Quadratic sells them, they do not appear the same, but here is a link so you can compare. http://www.quadratec.com/category/Je.../222/index.htm

 

There is a difference between the 94 and 98 fenders. It will fit, but look a little goofy.

 

Thanks Cliffy and Bustedback I will check it out on both accounts.

 

the 97+ the front of the fender is flush with the top of the bumper, and top is more rounded.

 

Thanks Tom95yj. yeah after the first two replies I went out and took a closer look and noticed the radius on the 98 as uposed to the ridge/chamfer on the 94. the shorter front would have been ok figured I could bob the opposite to match. but the top no go as Bustedback said would look goofy.
Is there any after markets/OEM's that fit rightThanks again.

 

I provided a link but your cheapest route would be junkyard. Call ones local to you or hit the pick and pay

 

Best fitting would be a used oem fender from a junkyard.The aftermarket sheet metal is always thinner gauge and fitting can be hit or miss with it.

 

Thanks andrewmp6 that is what I've found on other vehicles in the past. Was hoping over the years one company or another would hit the high quality mark but no surprise Oh well.