Duplicolor truck bed coating cure time?
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Yellowstone National Park
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Duplicolor truck bed coating cure time?
Anyone ever used this stuff? (rattle can) I appled it to my rocker panels and really like the look and texture of it BUT it seems to be taking forever to cure. I sprayed 5 coats of it trying to be careful that the layers were consistent as best I could. It's been 3 days and sections of it are still soft as if it's not cured fully but seems to be getting there, although very slowly. I'm afraid to drive it just yet in case a rock would ding it.
Last edited by iflyfish; 09-21-2012 at 05:49 PM.
#2
CF Veteran
Join Date: Oct 2011
Location: Seal Beach, CA
Posts: 4,440
Likes: 0
Received 2 Likes
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
http://www.autozone.com/autozone/acc...ier=291641_0_0_
This?? I used it on my rockers... Took only a few hours for mine to dry. Did you sand it? Or prime it before spraying that on there?
This?? I used it on my rockers... Took only a few hours for mine to dry. Did you sand it? Or prime it before spraying that on there?
#3
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
If you didn't sand it and use some kind of cleaner it'll never stick! I used it on a bumper and bumper caps so far. It was out in the sun in 80+ weather it was good to handle in about an hour.
#4
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Yellowstone National Park
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
http://www.autozone.com/autozone/accessories/Dupli-Color-16-5-oz-aerosol-Bed-Armor-DIY-truck-bed-liner-with-Kevlar/_/N-257b?itemIdentifier=291641_0_0_
This?? I used it on my rockers... Took only a few hours for mine to dry. Did you sand it? Or prime it before spraying that on there?
This?? I used it on my rockers... Took only a few hours for mine to dry. Did you sand it? Or prime it before spraying that on there?
Curious about something...I did a test scrape with a razor scraper and that stuff peeled right off in rubbery strips. What little residue was left cleaned up easily with Goof Off. I'm convinced I did a good prep. Could I have maybe gotten a bad batch? This is so odd. Anyway, I've got one side stripped, sanded and ready for new primer which took about two hours. Gonna do the other side in a little while. I think I might use another product for this.
This is what I used.
Last edited by iflyfish; 09-21-2012 at 08:50 PM.
#6
Junior Member
Join Date: Jun 2012
Location: agoura
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Grand Cherokee
Engine: 4.0
Just did my zj today with dupi color. They had 2 cans of each the bedliner and the armor so i got all 4. Used the bedliner and then the armor on top. Looks like its curing well. Dont want to scrap at it for a few days to make sure it cures all the way but looks solid. I'll post results. In a few days.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Yellowstone National Park
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Just did my zj today with dupi color. They had 2 cans of each the bedliner and the armor so i got all 4. Used the bedliner and then the armor on top. Looks like its curing well. Dont want to scrap at it for a few days to make sure it cures all the way but looks solid. I'll post results. In a few days.
#9
CF Veteran
Join Date: Mar 2012
Location: Richmond, VA
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Pretty much any bedliner takes a couple hours to dry to the touch, 24 to "dry" and about a week to fully cure. Obviously it differs due to weather, thickness, ect.
The duplicolor stuff sucks though imo. I used it on the rockers on my pickup and it's all peeled off. I'd taken the truck down to bare metal, primered it, taped off the rockers, painted and clear coated then went back to the primer to hit the rockers with it. Lasted about 4 months before it started coming off.
The duplicolor stuff sucks though imo. I used it on the rockers on my pickup and it's all peeled off. I'd taken the truck down to bare metal, primered it, taped off the rockers, painted and clear coated then went back to the primer to hit the rockers with it. Lasted about 4 months before it started coming off.
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
XJUSMC
Modified XJ Cherokee Tech
2
08-28-2015 04:52 AM
lpresnell
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
9
08-26-2015 02:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)