Cherokee Chat General non-tech Cherokee chat
XJ/MJ/ZJ/WJ

To do lists?

Thread Tools
 
Search this Thread
 
Old Mar 14, 2010 | 08:37 PM
  #1  
Soldat's Avatar
Thread Starter
Member
 
Joined: Aug 2009
Posts: 149
Likes: 1
From: Michigan
Year: 2000
Model: Cherokee
Engine: 4.0L
Default To do lists?

Anyone else have a long, expensive "to do list" for their Xj?

Here is mine:

Fix Mileage-Problem Unknown
-Replace sensors
-Check and/or swap fuel injectos

Change trasmission fluid

Change front differential fluid

Fix rear main seal

Fix pinion seal

Replace oil pan, rusted badly in several spots

Replace water pump and metal hose that is almost rusted through

Flush coolant

Fix multiple rust spots, and undercoat better

Find and fix whatever is making the howling noise in the rear end

Fix/Adjust steering


So many things to do....does every jeep owner live with this? No time, or money for a lift or anything because of all of this. Of course I could live without fixing a few of these, but I know they will just end up getting worse or causing other problems when I don't need them.
Reply
Old Mar 14, 2010 | 08:57 PM
  #2  
Dark Foot Stompin's Avatar
Junior Member
 
Joined: Mar 2010
Posts: 72
Likes: 0
From: CT
Year: 1995
Model: Cherokee
Engine: 4.0 High Output
Default

I need to replace my weather stripping

change oil

fix flood light

get my 4 wheel checked out (acting funny but i haven't had time to look at it)

and I'm sure there's more, but hey...she runs good.

EDIT: and replace my center counsel.
Reply
Old Mar 14, 2010 | 08:58 PM
  #3  
Jeepman659's Avatar
Seasoned Member
 
Joined: Dec 2009
Posts: 326
Likes: 0
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0 H.O. Police Package
Default

yes man. I just got done with my long expensive. the last two are to install my new 3 core radiator. and Belt. But damn is it worth it when you're done.
Reply
Old Mar 14, 2010 | 09:16 PM
  #4  
Programbo's Avatar
CF Veteran
 
Joined: Jan 2009
Posts: 1,964
Likes: 6
From: Baltimore, Maryland
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Default

I have a complete Rusty`s OffRoad 4.5" suspension liftkit that`s been sitting in my basement for 6 years (Got it off a Cherokee at the local junkyard) I`ll get around to installing it "someday". Also I have 2 nice offroad/work lights mounted to my front bumper which look cool but actually arent hooked up to anything. I bought the switch and wiring to do it but have never gotten around to it.
Reply
Old Mar 14, 2010 | 09:21 PM
  #5  
firstime00XJ's Avatar
Senior Member
 
Joined: Jan 2010
Posts: 712
Likes: 0
From: MI
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default

Here's my to-do list.

Replace driver's seat
Headlight Conversion - Rampage H4 kit
Buy/Install Hella FF75 Fog lights
Buy 4 new shocks, and 2 leafs
Install axle u-joints
replace pinion seal on front differential
buy rims (probably Cragar Soft 8's) and tires
Buy stock replacement air filter box at a pick 'n pull
K&N Replacement air filter
replace tie rod
replace drag link
replace steering stabilizer

Maybe I'll win the lottery....lol
Reply
Old Mar 15, 2010 | 10:49 AM
  #6  
Rmart30's Avatar
Senior Member
 
Joined: Feb 2009
Posts: 565
Likes: 0
From: Birmingham, Alabama
Model: Cherokee
Default

Ive got a loooong list of to do's with a big ole parts pile.

93 XJ install sliders, change all fluids,install radio,fix wiper delay, new starter,fix drooping drivers seatpan. 8.8 swap w/locker and install 4.10s and LB locker in front diff.

01 XJ, install lift kit, sliders and rear bumper. Replace front fenders , passenger door and hood. Remove complete interior and replace from my parts XJ into this one.
8.8 swap w/4.56... install 4.56 and LB locker in dana 30. Cut fenders and bushwacker flares install. Tint windows.

Got a couple of more XJs to work on and a ZJ i need to swap the trans in but those 2 listed above are at the top of the list.
Reply
Old Mar 15, 2010 | 06:14 PM
  #7  
FlemingXJ's Avatar
Senior Member
 
Joined: Dec 2009
Posts: 735
Likes: 0
From: Ft. Collins, Co
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Default

scavenge money everywhere i go to keep it filled with gas...ALWAYS priority #1

Besides that,

-change oil
-replace rotors
-bleed breaks
-wash it? naahhh
-change fuses

fun fun fun
Reply
Old Mar 15, 2010 | 06:20 PM
  #8  
Jeep Jeep's Avatar
Member
 
Joined: Feb 2010
Posts: 125
Likes: 1
From: Raleigh NC
Year: 99
Model: Cherokee
Engine: 4.0
Default

heres mine First get the money to actually work on it lol

-Replace the leaf spring centering pins
-put my new driveshaft in
-put a new valve cover gasket in
-put a new hood latch in
-get a hitch receiver
-need a new intake
-and finally clean it all up
Reply
Old Mar 15, 2010 | 09:05 PM
  #9  
guest02's Avatar
Senior Member
 
Joined: Sep 2009
Posts: 629
Likes: 0
Model: Cherokee
Default

My ToDo list is...

Reset clock on stereo
Replace leaky Valve Cover
Re-paint Rocker Panels and flares
Oil change and lube
RE 3.5" Super-Flex with spacers
Buy parts "Donor" Rig

... and oh yeah, my 4WD Conversion!!!
Reply
Old Mar 15, 2010 | 10:33 PM
  #10  
ceejay612's Avatar
Member
 
Joined: Jan 2010
Posts: 214
Likes: 0
From: Enterprise, AL
Year: 2000
Model: Cherokee
Engine: 4.0I6
Default

- install U joints onto the front DS i found at the junk yard
- install sye
- install front drive shaft in rear to sye
- remove TC drop
- install ZJ TC skid on XJ
- install ZJ gas tank skid on XJ
- install new tie rod ends on ZJ V8 tie rod and drag link
- install ZJ tie rod and drag link on XJ
- mud, wash, repeat
Reply
Old Mar 16, 2010 | 01:09 AM
  #11  
russellmn's Avatar
Junior Member
 
Joined: Mar 2010
Posts: 36
Likes: 0
Model: Cherokee
Default Hehe,... yeah...

For my 2 door build...


Strip it down to nothing
chop out most of the original "frame" add lots of tube to replace
16" coilovers/bypass/air bumps
RuffStuff 9" front and rear/ possibly D44s for now, 9" later
37" or 40" somethings
beadlocks
AW4/D300 swap for now, LS/4L60/Atlas or Stak later
PRP/Mastercraft/Twisted Stitch
hydro-assist steering
Lord only knows what else I haven't listed and/or will crop up!

Last edited by russellmn; Mar 16, 2010 at 06:12 AM.
Reply
Old Mar 16, 2010 | 01:10 AM
  #12  
Verbalkint99's Avatar
Member
 
Joined: Aug 2009
Posts: 149
Likes: 0
From: Macomb, Mi
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Lets see how long this is....

Fix drivers side door pin
Fix front passenger window switch
Fix O2 sensor wiring
Install Bushwackers
Install TB spacer (got it free)
Install a CAI (when not wheeling)
Install hitch receiver
Replace rear wiper motor
Replace latch of rear hatch
Replace rear interior trim (PO beat the hell out of the cargo area)
Fab rear 1/4 armor from diamond plate
Re-install front door speakers (did a quick and crappy job on a very cold day

Have everything I need...just need the time off sbhool and work...and a couple nice days
Reply
Old Mar 31, 2010 | 12:00 AM
  #13  
azxj99's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 1,101
Likes: 0
From: Arizona
Year: 1999
Model: Cherokee
Engine: 4.0
Default

ha do i ever, but who doesnt?
1. 3" lift with all other stuff to go along
2. paint rims
3. cb installed
4. new seats or seat covers
5. move and paint decals
6. linex corner trim and sliders
7. add rocker panel plates
8. eventually want 13 hids with deep cellbattery (sounds crazy but thats me plus i wheel at night
9. new tires
10. snorkle
11. exhaust
12. new bumpers back: tire swing highlift mount gas mount front: winch and hitch
13. tube doors?
14. diesel switch?
Reply
Old Mar 31, 2010 | 01:32 AM
  #14  
lliamsdad's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 1,275
Likes: 0
From: Alexander City, alabama
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Default

Install uca and lca
Change oil and filter
Get the tranny rebuilt
Longer brake lines
Sye and ds
Zj steering
Tie rod ends and boots
Paint it
Install roof rack
Bumpers front and rear
To much to sit down and list
Reply
Old Mar 31, 2010 | 11:01 AM
  #15  
owellwhatever's Avatar
Junior Member
 
Joined: Mar 2010
Posts: 86
Likes: 1
From: Shoreline, WA
Year: 1989
Model: Cherokee
Engine: 4.0L
Default

So far as I know right now:

Brakes
Rebuild NSS
rear bumper
pull door panels and see why some power locks don't quite work, prob the actuators
Wiper switch, I think. Only works on high and you have to manually turn off blinkers.
paint.
Reply



All times are GMT -5. The time now is 05:10 PM.