bumper trimming pics??
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: Austin, TX/ Atlanta, GA
Posts: 611
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
bumper trimming pics??
i would like more ground clearance under my front bumper...does anyone have any pics of the lower part of the stock bumper on a 97+ cut off? the part with the fog lights??
Thanks!!!
Thanks!!!
#2
CF Veteran
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Best pic I have of mine
Just used a cut off wheel on the end caps and drilled out the rivets in the center piece
I can get better pictures tomorrow in the sun light if you like.
Just used a cut off wheel on the end caps and drilled out the rivets in the center piece
I can get better pictures tomorrow in the sun light if you like.
#3
Senior Member
Thread Starter
Join Date: May 2010
Location: Austin, TX/ Atlanta, GA
Posts: 611
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
yeah that would be great! thanks a lot! can you get some of the corners? i just want to make sure im going to like it before i go hacking into my perfectly good bumper. haha
#5
Senior Member
Thread Starter
Join Date: May 2010
Location: Austin, TX/ Atlanta, GA
Posts: 611
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Yeah that does! Thanks! So how did it turn out at the bottom of the fender flare part of the bumper corner? Because before it sort of flows into the bottom part
#6
Member
Join Date: Dec 2009
Location: dfw
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I tore mine up trying to play on a big pile of snow. so when i got home i just took a rotozip (i think thats what its called) and cut it all the way around the bottom. I think it looks a little better but whatever
Trending Topics
#9
Senior Member
Thread Starter
Join Date: May 2010
Location: Austin, TX/ Atlanta, GA
Posts: 611
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Yeah thanks for the pics guys! I just though about something. I have sway bar drop brackets and I am worried that te sway bar might show if I cut the bottom section ofte bumper off. I will have to look at that when I get home.
#12
CF Veteran
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Why would the sway bar showing present a problem? Heres mine after trimming.
#14
Senior Member
Thread Starter
Join Date: May 2010
Location: Austin, TX/ Atlanta, GA
Posts: 611
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Well if the sway bar is showing it won't lookgood. That's all. No mechanical problem with it hanging down. And that's that's the perfect shot I'm looking for!