ballancing 31's?
CF Veteran
Joined: Dec 2010
Posts: 9,897
Likes: 2
From: shawnee,ks
Year: 1993
Model: Cherokee
Engine: 4.0
Most tire shops will NOT put them in for you but I would say for any tire that goes offroad that it is good idea. And I don't figure it would do anything to the wheels, if you want you can always bedline or under coat the inside (like inside of the tire)
Senior Member


Joined: Feb 2009
Posts: 522
Likes: 28
From: Prosser, WA
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0
No problems for aluminum rims.
I wouldn't beadline anything because you are kinda defeating the purpose of balancing by adding more uneven weight.
Why are you putting antifreeze in your tire?
I wouldn't beadline anything because you are kinda defeating the purpose of balancing by adding more uneven weight.
Why are you putting antifreeze in your tire?
CF Veteran
Joined: Apr 2011
Posts: 1,173
Likes: 3
From: Maine
Year: 1999
Model: Cherokee
Engine: 4.0 inline 6
To keep them from getting to hot... or up here in Maine maybe freezing in a clump when it's parked.
Senior Member


Joined: Feb 2009
Posts: 522
Likes: 28
From: Prosser, WA
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0
I wouldn't worry about them freezing in a clump, all the tires I've taken apart and I've never seen moisture in them. But I'm not saying don't do it.
Paint might be able to flow evenly but not bedliner.
Paint might be able to flow evenly but not bedliner.
CF Veteran
Joined: Dec 2010
Posts: 9,897
Likes: 2
From: shawnee,ks
Year: 1993
Model: Cherokee
Engine: 4.0
The stuff I used was like a spray paint can, I got it from Walmart. And it is the best coat of spray anything that I have ever gotten, its reallllly even I'd say
Thread
Thread Starter
Forum
Replies
Last Post
KotaKid287
Modified XJ Cherokee Tech
37
Sep 16, 2012 10:12 AM
jkustomz28
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
38
Apr 19, 2012 06:31 PM
MIKEZJ98
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
15
Oct 24, 2009 02:35 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



