axle bent
07-26-2009, 11:28 AM
#1
Member
Thread Starter
Join Date: Nov 2008
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
axle bent
I have a d30 front axle, is there a way that I can find out where my axle is bent? either the tube or the knuckle? I have to much camber on the left side. thanks.
07-27-2009, 11:13 AM
#4
CF Veteran
It is common to have a change in castor from one side to the other. Your axle was assembled that way, usually 1.5 - degrees difference. That way if you fall asleep at the wheel it goes to the ditch instead of traffic. To fix it have a shop put in an off set ball joint and it will track straight.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-08-2015 04:36 PM
Ibanezz
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-10-2015 07:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)