i have an issue with my 4wd when i shift in to 4 hi or 4 low i donnt get the part time light the last time i changed my oil i knocked a hose off the axel and i put it back on something else maybe if any yone has a pic of the back of a dana 30 witht the hoses connected i would be very greatful there is a brass colored nipple and idk if thats where the hose belongs but all i know is i found out my 4wd doesnt work after i allmost got stuck in the mud i would love to fix my 4wd before snow some help if posible thank you

 

Yep you have to reconnect that hose, it plugs into the little canister on the axle. Heres a pic I found online, not the best pic but hope it helps

 

well minw has 2 nipples theres one on the left side and one like on the top ish

 

 

Yours should have 3, unless one broke off. two of the three hoses are are molded together in one connector, and then the third hose its by itself. Just like you see in the pic

 

thank you for the help i fixed it now but the longer part of the connector can that be trimmed because the one nipple has barly any connector on it ?

 

You could try but I wouldn't, you could end up causing a vacuum leak which could make the cad act up

 

How far did the connector go on? And problem on the help. Any time.

 

theres a little less then a .25 inch that the nipple isnt covered