1 ton utk steering question
#1
Member
Thread Starter
Join Date: Feb 2011
Location: Central Iowa
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Output
1 ton utk steering question
Is there anyone that has the utk kit from jcr that can help me by measuring the tie rod and drag link length. Any kit that uses the gm 1 ton tie rods will work. Thanks
#4
CF Veteran
Join Date: Jan 2011
Location: Rochester
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I in the process if doing a OTK setup using the same stuff. I'll measure my mock up tie rod when I get home. Hvent gotten to the drag link or Trac bar yet
#5
Member
Thread Starter
Join Date: Feb 2011
Location: Central Iowa
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Output
Ok sounds good i was just wanting to know so that i could tell the guy what length to cut the dom when i buy it. Also its going on a d30.
#7
Member
Thread Starter
Join Date: Feb 2011
Location: Central Iowa
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Output
Ok awesome thanks if you could let me know what ur drag link will measure when its done that would be cool. Im still trying to figure out what im gonna do about a reamer.
Trending Topics
#10
CF Veteran
Join Date: Jan 2011
Location: Rochester
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Ya the draglink tres have a bigger tapper . I got the inserts from TMR customs .com. and for the tie rod I ordered from ruffstuff
#13
Member
Thread Starter
Join Date: Feb 2011
Location: Central Iowa
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Output
Did the 43 inches for the tie rod include the weld on ends? So overall total welded length? Any luck with the drag link measure?
#14
CF Veteran
Join Date: Jan 2011
Location: Rochester
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
That was just the tie rod. The exposed ends of the inserts will probably add roughly 2 inches. Haven't done much more, been tied up with wedding plans and trying to buy a house
#15
Member
Thread Starter
Join Date: Feb 2011
Location: Central Iowa
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Output
No problem lol sounds like you got your hands full. So just to get this straight so i only cut once. Measure tubing to 43 inches weld on inserts and im set?