And yet another front bumper build
Thread Starter
Junior Member
Joined: Feb 2010
Posts: 53
Likes: 0
From: Tucson, AZ
Year: 1996
Model: Cherokee
Engine: 4.0
Thanks!
I think I need to trim the flares a little differently, it looks a little strange with the flares sticking out about three inches past the corner returns. Might be just me being picky, but I'll play around with the stock flares before I replace them with black ones.
I think I need to trim the flares a little differently, it looks a little strange with the flares sticking out about three inches past the corner returns. Might be just me being picky, but I'll play around with the stock flares before I replace them with black ones.
Thread Starter
Junior Member
Joined: Feb 2010
Posts: 53
Likes: 0
From: Tucson, AZ
Year: 1996
Model: Cherokee
Engine: 4.0
Yeah, I think it will hold up just fine. I used the same basic materials (3x5x3/16" instead of 3x6x3/16") for the bumpers on my old TJ, beat them repeatedly into rocks and only got some rock rash. 
I considered 1/8" wall but due to the receiver being used as a recovery point I decided a little extra weight was worth the added strength.
I considered 1/8" wall but due to the receiver being used as a recovery point I decided a little extra weight was worth the added strength.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)