Xj tire swing rear bumper project
01-25-2012, 09:54 PM
#47
CF Veteran
Thread Starter
Join Date: May 2011
Location: Aurora, Co
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Originally Posted by JAYSSICKXJ
Nice job.. Great Attn to detail!
01-26-2012, 06:22 PM
#48
CF Veteran
Thread Starter
Join Date: May 2011
Location: Aurora, Co
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
So I just got back from lowes and they had my 1 1/4 hole saw for the spindle. Here's a test fit. Got the first hole done and then the goddamn set screw flew out and my bit is useless without the pilot bit...
01-29-2012, 07:38 PM
#51
CF Veteran
Thread Starter
Join Date: May 2011
Location: Aurora, Co
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
plans
hey guys! sorry it took so long but i finally got some plans done, and im gonna add the tire swing plans after this. here they are!
01-29-2012, 08:07 PM
#52
CF Veteran
Thread Starter
Join Date: May 2011
Location: Aurora, Co
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
PLANS
heres a drawing of my plans for the tire swing. as i build i will add dimensions and change as needed
02-01-2012, 09:29 PM
#53
CF Veteran
Thread Starter
Join Date: May 2011
Location: Aurora, Co
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Got some more work done on the tire swing. Here's pics. All I have left to do is finish the latch and build the frame and mounting plate, then paint it! As you can see, I had to angle the frame to clear the hatch
02-02-2012, 09:11 PM
#55
CF Veteran
Thread Starter
Join Date: May 2011
Location: Aurora, Co
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
What I got done this afternoon. Made a little block so the swing will sit level above the bumper. All I need to do is the frame and mounting plate then I'm done 
hoping for a SNOWDAY tomorrow, supposed to get 15-20" here in the metro. If that's the case, I'm gonna heat up the shop and work all day to finish it!
hoping for a SNOWDAY tomorrow, supposed to get 15-20" here in the metro. If that's the case, I'm gonna heat up the shop and work all day to finish it!
02-02-2012, 09:19 PM
#56
CF Veteran
Thread Starter
Join Date: May 2011
Location: Aurora, Co
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Originally Posted by FISHIES848
What I got done this afternoon. Made a little block so the swing will sit level above the bumper. All I need to do is the frame and mounting plate then I'm done hoping for a SNOWDAY tomorrow, supposed to get 15-20" here in the metro. If that's the case, I'm gonna heat up the shop and work all day to finish it!
hoping for a SNOWDAY tomorrow, supposed to get 15-20" here in the metro. If that's the case, I'm gonna heat up the shop and work all day to finish it!
