Xj tire swing rear bumper project
#181
Seasoned Member
Join Date: Nov 2012
Location: NC
Posts: 401
Likes: 0
Received 5 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.slow
So I need a trailer hitch, nothing with wiring or anything but just a hitch with a reciever. Does anyone know any way to possibly build your own? or any other vehicle with the same frame rails that would be bolt on to an XJ? Ive checked every junk yard in my city for an xj with a trailer hitch and cant find one....
#182
Junior Member
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
#183
No, I don't lick fish.
So I need a trailer hitch, nothing with wiring or anything but just a hitch with a reciever. Does anyone know any way to possibly build your own? or any other vehicle with the same frame rails that would be bolt on to an XJ? Ive checked every junk yard in my city for an xj with a trailer hitch and cant find one....
As far as your question... you may wanna either ask your question here -> https://www.cherokeeforum.com/f2/ask...7/#post2343452
or start a new thread in the fabrication section that you're in right now
people get a little touchy on forums when you start asking questions that aren't specifically related to the original poster's project - they call it hijacking
#184
Junior Member
Join Date: Dec 2012
Location: Fredericton, New Brunswick, Canada
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
What are they demensions of the bracket that attached to the stock bumper mounting locations? (the plate with 4 holes in it, e.i how for apart are the holes and how big is the peice) i would normally just take my bumper off and measure but my bolts are rusted really bad and once i take it off im going to need to build a new bracket and i dont want to drive around with no rear bumper while im building the brackets.
#185
CF Veteran
Thread Starter
Join Date: May 2011
Location: Aurora, Co
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
What are they demensions of the bracket that attached to the stock bumper mounting locations? (the plate with 4 holes in it, e.i how for apart are the holes and how big is the peice) i would normally just take my bumper off and measure but my bolts are rusted really bad and once i take it off im going to need to build a new bracket and i dont want to drive around with no rear bumper while im building the brackets.
Thread
Thread Starter
Forum
Replies
Last Post
PopsOldXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-25-2015 06:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)