Show me your weldies!!!!
CF Veteran
Joined: Oct 2009
Posts: 1,474
Likes: 2
From: south jersey
Year: 1997
Model: Cherokee
Engine: 4.0
what are you fabricating in this pic ? whats the need for the huge amount of room your creating in the trans tunnel ? i can only think maybe some sort of crazy transfer case 
Seasoned Member
Joined: Dec 2009
Posts: 401
Likes: 0
Model: Cherokee
Alright Fabbers let me see your goods. Post up pics of your best welds, boogers, and everything in between! Its Time to show off how good you really are or aren't! Who ever I or u guys think is the best or the funniest after a week or two gets a Free tie Rod from me at Ironman!
Andy
Ironman4x4fab.com
Here's my entry from a few years ago back in the glory days.
Andy
Ironman4x4fab.com
Here's my entry from a few years ago back in the glory days.
Member
Joined: Dec 2008
Posts: 242
Likes: 0
From: Holts Summit Missouri
Year: 1993
Model: Cherokee
Engine: 4.0L
Junior Member
Joined: Dec 2009
Posts: 61
Likes: 0
From: Hartsville,SC
Year: 1994
Model: Cherokee
Engine: 4.0L
Thread Starter
Former Sponsor
Joined: Oct 2009
Posts: 316
Likes: 0
Year: 1993
Model: Cherokee
Engine: 4.0
polar XJ I sold that bumper before I built the swing down tire carrier. Thats what the tabs were for.
I do have to say I recognized the blue and orange doubler right away but the sonic route 44 sealed the deal. Welcome to CF G-man man its a little friendlier over here! I dont care if you post my welds or yours I already gave you the track bar, drag link and tie rod! but you can show those so guys can see what I'm gonna give out.
as far as people checking out my equipment...... well ummmm I dont quite know what to say heh!
I do have to say I recognized the blue and orange doubler right away but the sonic route 44 sealed the deal. Welcome to CF G-man man its a little friendlier over here! I dont care if you post my welds or yours I already gave you the track bar, drag link and tie rod! but you can show those so guys can see what I'm gonna give out.
as far as people checking out my equipment...... well ummmm I dont quite know what to say heh!
Last edited by ironmanandy; Dec 12, 2009 at 12:24 AM.
Member
Joined: Jul 2009
Posts: 229
Likes: 1
Year: 1985
Model: Cherokee
Engine: puny lil 4 cyld... 2,5 litres, I-4, carburettor
Well i want to play too.. I got certified in stick about 15 years ago, and never touched it since... So i went to harbor freight and got a cheapo wire feed. Just for a little this and that.
Sooo this is my first weld. I think i should have worked on plates first.. lol But this is the nut to hold my hood pin.
please feel free to point and laugh
Sooo this is my first weld. I think i should have worked on plates first.. lol But this is the nut to hold my hood pin.
please feel free to point and laugh
Thread Starter
Former Sponsor
Joined: Oct 2009
Posts: 316
Likes: 0
Year: 1993
Model: Cherokee
Engine: 4.0
Is this a recent pic from the hubble telescope of some new flux core black hole? Heh, Im just messing man its blurry but looks like a flux core weld and even with a lot of practice cheap flux core set ups are very hard to make look anything other than gross. truth be told though, a proper flux setup provides the strongest Mig weld.
Member
Joined: Jul 2009
Posts: 229
Likes: 1
Year: 1985
Model: Cherokee
Engine: puny lil 4 cyld... 2,5 litres, I-4, carburettor
Yea I knew better than to go cheap. But now that i have the heep running good. I will be able to get a decent welder. After a few mods ive wanted to do of course. I am working on removable doors at the moment.. Sorry about the blur stupid cell phone.. 