Well for Christmas I got a new JD2 Notch master tubing notcher SO instead of using my crappy old vise and stand to hold it.. I decided I would build a stand for it, that could also double as a holder for another vise I have.


SO I took some 2x4x1/8 tubing and took my 13/4 hole saw and drilled a hole though both sides. Then I cut another piece 18" long to make it a 3 legged design.

Then I took a piece of 13/4 x 42" tubing to make the stand. then I cut a 6" long cut so the 1.5" tube will slide in.



Here is what it looks like with the notch master on it.

I will do a similiar thing to make my vice piece.

 

cool got a bigger pic?

 

I wil take some more tommorow..

 

D50 beat me to it; bigger picture! You got a bender?

 

I didnt take any more pics of it today. I did battle with a JK's suffering from death wobble, and no closer to gettting that straight.


OH yeah got me a bender


I have a JD2 bender with the air over hydraulic jack. Picked it up for 125 Then did some swapping and got 1.5 5.5clr, 1.75x6clr and 2x 6 clr dies. ...

 

oh snap, that's right! I remember this picture from my thread I started back about my buddy's bender. That's sweet you got a notcher set up next. Can't wait to see some parts! Take pictures; lol!