My winch bumper
CF Veteran
Joined: Apr 2010
Posts: 1,053
Likes: 0
From: fallon, nv
Year: 1988
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
Love it. let's see some shots of the fenders/bumper corner to see how it the new flares line up.
Thread Starter
CF Veteran
Joined: Jan 2010
Posts: 5,482
Likes: 25
From: Virginia Beach by way of Michigan
Thanks!
Yeah I know...saving up for 33's.
Best I've got right now. This was just after getting the flares on and before the winch.
Yeah I know...saving up for 33's.
Member
Joined: May 2011
Posts: 122
Likes: 0
From: Central Valley, CA.
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Thread Starter
CF Veteran
Joined: Jan 2010
Posts: 5,482
Likes: 25
From: Virginia Beach by way of Michigan
Originally Posted by zwhiz
love this! im going to do my best to copy you...thanks for the step by step and the measurements. looks awesome man
Senior Member
Joined: Jan 2012
Posts: 720
Likes: 1
From: vanburen
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
that bumper looks awsome! but on the frame mount brackets i see you only had 3 bolts on each side they may strech over time from winching, i made mine longer down the frame rail and have 7 bolts on each side and put some spacers inside the fram rail from smashing it together just to be safe lol, but it looks great!!
Thread Starter
CF Veteran
Joined: Jan 2010
Posts: 5,482
Likes: 25
From: Virginia Beach by way of Michigan
Originally Posted by nickxj94
that bumper looks awsome! but on the frame mount brackets i see you only had 3 bolts on each side they may strech over time from winching, i made mine longer down the frame rail and have 7 bolts on each side and put some spacers inside the fram rail from smashing it together just to be safe lol, but it looks great!!
Newbie
Joined: Mar 2012
Posts: 7
Likes: 0
Model: Cherokee
This will be a couple day project, but I figured I'd start the thread and update it as I went along. Didn't get to far tonight, but it's at least started.
Here's what the Jeep looked like this morning:
Removed stock bumper and got started on the following design. It's been slightly tweaked since drawing it up, but you'll see that in a couple days.
Stared by ordering a set of tie-in brackets from JCR. Just a note, if you ever buy these, be prepared to hog out the bolt holes they already put in the brackets.
From there it was making the bumper mounts.
Ground down the corners a little and fastened them up to the tie-in brackets.
That was it for today as my dad and I got a late start to it. Tomorrow brings cutting more pieces and test fitting them in place.
Here's what the Jeep looked like this morning:
Removed stock bumper and got started on the following design. It's been slightly tweaked since drawing it up, but you'll see that in a couple days.
Stared by ordering a set of tie-in brackets from JCR. Just a note, if you ever buy these, be prepared to hog out the bolt holes they already put in the brackets.
From there it was making the bumper mounts.
Ground down the corners a little and fastened them up to the tie-in brackets.
That was it for today as my dad and I got a late start to it. Tomorrow brings cutting more pieces and test fitting them in place.
thumbs up