looking into buying a mig welder just dont know whats good have about 1400 to spend any ideas?

 

with 1400 you can get about any you want. i have a hobart and love it. if i had that much i would get a plasma cutter too.

 

get a nice 210 (if you have the outlet, if not use some of your budget and get the power for it lol) Also get it with a bottle. i have always used millers with NO issues. Just make sure your get a warranty. but lincoln, miller, hobart are good brands.

just my $0.02 again. 210 with gas.


btw i use a millermatic 210 with gas. and i used it to weld my bumper (which is 3/8" thick) and it got VERY GOOD penetration.

 

http://www.off-road.com/trucks-4x4/r...der-21547.html

 

k so i was just going through craigslist and i couldent find any 210's but i did find this http://vancouver.en.craigslist.ca/rd...854573141.html

 

wow for $900!!!! that is great and better than the 210!!! let me grab you teh spec sheet on it

http://www.millerwelds.com/products/...df/DC12-49.pdf


just remember it will do GREAT on thick stuff, and thin thin stuff it will work on, but you will need to play with the settings to get it to do it right.



i would buy it in a heart beat!!

 

sicness i shall go and take a look at it today then thx for your help

 

Craigslist ad is gone. Dude, i so hope you bought that.

 

Millermatic!!!!!! Any of them, Get the biggest one you can afford!!!!!!!