Making BPE ??'s.........
#1
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Masonville, NY
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Making BPE ??'s.........
Are the dimensions/plans for making BPE's available? I work in a metal fabrication shop and could fab them up and have them powder coated for literally zilch. I've searched but haven't found them yet.........
#6
Seasoned Member
Join Date: Jun 2010
Location: Illinois
Posts: 397
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
http://www.quadratec.com/products/16030_100.htm
JKS Bar Pin Eliminators prevent distortion of the shock absorber bushings by adding lateral compression, or preload. This ensures the bushings maintain their shape and deflect suspension impact forces to the shock absorbers, thus preventing the annoying noises and premature bushing failure common with standard bar pins.
JKS Bar Pin Eliminators prevent distortion of the shock absorber bushings by adding lateral compression, or preload. This ensures the bushings maintain their shape and deflect suspension impact forces to the shock absorbers, thus preventing the annoying noises and premature bushing failure common with standard bar pins.
Trending Topics
#8
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Masonville, NY
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Using the sway bar mount isn't one of my options. It's my DD and I want to keep that intact. Fabbing a pair up won't cost me anything but some time. I suppose I could use the rear shocks to gleam some dimensions. Normally, I would just crawl under with a tape measure or caliper in hand and go to town, but the below zero temps we're experiencing make it less attractive.....
#9
CF Veteran
Join Date: Oct 2009
Location: somewhere Gee oh Dee cant find me...
Posts: 4,529
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: I6 4.0L
#11
Newbie
Join Date: Jan 2011
Location: Tulsa, OK
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I actually made some using my old roller fairlead (well, cutting it up), so if you have one of those laying around it works great. I can take some pics later and get you some dimensions.
BTW I'm new here, long time looker, though. So hi everyone.
BTW I'm new here, long time looker, though. So hi everyone.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
nrwphoto
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-09-2015 10:41 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-07-2015 11:30 PM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 11:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)