i put the petal to the metal and my foot went through the floor
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Location: nanticoke pa
Posts: 65
Likes: 0
Received 1 Like
on
1 Post
Year: 96
Model: Cherokee
Engine: 4.0
i put the petal to the metal and my foot went through the floor
I knew my floors were bad but when i pulled the carpets up it turned into a nightmare. Since im riping my floors out im also cutting the wheel wheels, and redoing my rockers with 2x6 1/4 wall steal. Its alot of work and goin to take me a little while. Im goin to post also of pics and try to make this thread the best i can. Bare with me isuck whith computers.
#2
Seasoned Member
Join Date: Mar 2010
Location: Modesto
Posts: 379
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0 high output straight 6
WOW..........
Those floors are bad, I like how it looks like you have grass growing in it in the bottom pic lol.
Sounds like you have good plans for the floor and rocker replacement, I'm subscribing
looking forward to watching the thread.
Those floors are bad, I like how it looks like you have grass growing in it in the bottom pic lol.
Sounds like you have good plans for the floor and rocker replacement, I'm subscribing
looking forward to watching the thread.
#5
Junior Member
Thread Starter
Join Date: Jul 2009
Location: nanticoke pa
Posts: 65
Likes: 0
Received 1 Like
on
1 Post
Year: 96
Model: Cherokee
Engine: 4.0
here is the wheel wells. i didnt do the slice and bend tech, i didnt the cut and weld insted and im happy with it. im just goin to use some bondo to smooth everything out
#7
Junior Member
Thread Starter
Join Date: Jul 2009
Location: nanticoke pa
Posts: 65
Likes: 0
Received 1 Like
on
1 Post
Year: 96
Model: Cherokee
Engine: 4.0
i started the build 2 weeks ago. but this is the first time i got a chance to start a thread. as of now the floors are on hold while i build my rockers. im using 2x4 stock as extra support for the 2x6 rockers .they are being welded to the unibody and cut to a 45 degree on the end to lap under the 2x6 and be capped for a clean look. i finished the rocker/ sliders last night they are cut on a 45 on the ends and capped also. oh and im using angle iron on the backside of the rocker steal to have a extra lip to go into the floor board area so the floors can be welded on to
Trending Topics
#14
CF Veteran
Join Date: Nov 2009
Location: New Jersey
Posts: 1,261
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Wow, you went ***** to the wall with floor repair. I just cut out the cancerous metal and welded in some new stuff for mine. Then again, I'm 17, broke, and have no time because all I do is work...but now I have floors. Keep up the good work