Hydraulic piston track bar.
Thread Starter
CF Veteran
Joined: Jun 2009
Posts: 5,383
Likes: 5
Year: 1988 limited
Model: Cherokee
Engine: 4.0 litre
I have found some pistons with rods passing all the way through the cilinder, it would need only 2 of these, they cost 300 each, it depends on what u are planning to do, you would not need any shocks and springs and the system would be totally linear.
CF Veteran
Joined: Sep 2007
Posts: 4,869
Likes: 14
and if something on your power steering goes out you are going to have an AWESOME time getting off the trail.
its a neat idea, but not practical for 101% of xj'ers
Seasoned Member
Joined: Dec 2008
Posts: 311
Likes: 0
From: Burleson, TX
Year: 1995
Model: Cherokee
Engine: 4.0L
you would need full hydro steer to eliminate bumpsteer and you would be insane to then drive it on the street.
and if something on your power steering goes out you are going to have an AWESOME time getting off the trail.
its a neat idea, but not practical for 101% of xj'ers
and if something on your power steering goes out you are going to have an AWESOME time getting off the trail.
its a neat idea, but not practical for 101% of xj'ers
CF Veteran
Joined: Nov 2008
Posts: 2,003
Likes: 4
Year: 1987
Model: Cherokee
Engine: 4.0
epic fail.
neat theory. but so was my theory for practical (i.e. not in a vehicle) use of a 2.HATE liter as a combination 3cyl gas/3cyl air compressor. now THAT was a neat idea...but it just turned out to be fun to shoot rods through the block and put it to good use in the scrap pile.
neat theory. but so was my theory for practical (i.e. not in a vehicle) use of a 2.HATE liter as a combination 3cyl gas/3cyl air compressor. now THAT was a neat idea...but it just turned out to be fun to shoot rods through the block and put it to good use in the scrap pile.
Thread
Thread Starter
Forum
Replies
Last Post
studmuffin
Cherokee Chat
8
Oct 5, 2015 01:54 PM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
