'scuse me....need a little help gettin' this here swollen mellon through the door.

Thanks guys, glad ya like my junk.

 

It's a 3inch test plug that I cut down with a razor quite a bit that fits into the factory hole. I broke my original "plug" when I had to remove for repainting and patching. So went to home depot and I think it was $4.99 (I would suggest a reciept and size it up before you leave because plugs of the same measurement but different makers "sandwhich" differently when tightened." I live in the NW so it has come in handy more than once for a drain. I put the wingnut on the opposite side of how it comes purchased because that stud sticks up a ton when installed the way its suppose to be.

 

heres my JK Control arms that im using for my lower control arms

cost me all of nothing...

 

How long are the JK control arms eye to eye??

 

ill have to measure a pair when i get back to the shop. but im thinking 1/2-3/4" longer than stock is what i measured when i installed them

 

Ok great thanks

 

 

hmmm im liking this idiea

 

damn! i love the way that looks. my paint job is going to hell, how much did that set you back?

 

great idea dude, i just did it an hour ago and it keeps that heat down great! thanks man!

 

Question...it looks like the arm is bowing more towards the axle than the frame...is that just an optical illusion? I would think they would allow more tire room mounted the other way...

 

Before and after. I needed to be able to put long pieces of wood and my bike in the back so I had to completly change the PO's setup and still find a home the Viair 550 and the 2.5 gal tank and the hi lift. Check out my solution.

Before from the previous owner:

After My Mod:

 

Running a wire from the top terminal to the bottom terminal would accomplish the same thing without running a wire to the battery.

 

WOW!!!!!! write up?!

 

how much did that cost? it looks pretty sick!