I moved my vac ball between the battery and the reservoir plenty room and the screw holes were already there ..

 

Since I have a non disco axle, almost nothing else vacuum powered and removed my cruise control, I removed my (cracked) vacuum ball and just put a plug in the line. Everything works exactly as normal now, minus a vac leak.

 

Does the ac use the vacuum ball?

 

Stubby I made from scratch

 

Looks real good

 

Agreed!!

 

Yes. If the ball is not working or the vacuum line is broken... your A/C will still blow cold but just out the defroster vents.

 

Your blend door is vacuum operated not your ac

 

GAHH really! my ac is out cause i need a new coil but i tried the fan and it would only blow out the winshield defrost vents. Is the ball bad if the fan wont blow through the other vents ? How much are these vacuum *****? Cheap?

 

You can make one, it's just a hollow plastic ball, nothing special about it, just provides a space for a vacuum.

 

Why oh why are there spikes on your hood?!?!

 

Rotflmao.

 

Got one at the jy for like 10$

 

Piece of cake lol, i disconnected the ball. Pulled the vac hoses up. Cut to length. Unmounted the resevoir deck moved it placed ball under and bolted back up

 

I cut the brackets off a set of front seats. (below the slide rails) Then wielded tabs on and bolted in place of the rear bench.