Axle mount angles?
#1
Seasoned Member
Thread Starter
Join Date: Nov 2010
Location: Cincinnati, Ohio
Posts: 473
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0 I6
Axle mount angles?
i need some help and im not sure if this should go in tech or fab so here goes...
I recently twisted one of the LCA axle mounts completely off and due to that, the passenger upper and lower mounts are mangled. I ordered new mounts and now i just need to find out the correct angle to weld the upper mount to. Thanks!
I recently twisted one of the LCA axle mounts completely off and due to that, the passenger upper and lower mounts are mangled. I ordered new mounts and now i just need to find out the correct angle to weld the upper mount to. Thanks!
#4
Uppers are 10deg off the centerline of the axle.
Easy way to locate them is to bolt them on the uppers and us a couple floor jacks to properly position the axle under the rig then weld them in place.
Easy way to locate them is to bolt them on the uppers and us a couple floor jacks to properly position the axle under the rig then weld them in place.
Thread
Thread Starter
Forum
Replies
Last Post
Ibanezz
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-10-2015 07:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)