When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cherokee of the MonthCome check out our Cherokee of the Month section. Enter your rig! Check out other rigs! VOTE for your favorite.
You Must have 25 or more posts to participate.
Ok here's my 2000 XJ. 3.5 inch lift, 31/10.5 15's on 8 inch rims. Threw on a Thule and went through all the fluids, new starter, windshield, serpentine belt, battery, headliner and all before opening the can of worms. Rocker, floor pan RUST!
So after 4 months in the garage wrenching and welding on floor pans, fenders, doors and 2x6 rockers the rust is now gone! As it sits now with a partial epoxy primer paint job, new carpet with Thermo-tech sound/heat mat and new, recovered seats it's getting close to a finish paint job.
Ok darn it. I'm new and apparently not enough post to enter and didn't use the right form/forum! Aw well, here's my XJ just for sheets and giggles.
Last edited by MotoBoss; Jan 18, 2018 at 09:06 PM.
Ok here's my 2000 XJ. 3.5 inch lift, 31/10.5 15's on 8 inch rims. Threw on a Thule and went through all the fluids, new starter, windshield, serpentine belt, battery, headliner and all before opening the can of worms. Rocker, floor pan RUST!
So after 4 months in the garage wrenching and welding on floor pans, fenders, doors and 2x6 rockers the rust is now gone! As it sits now with a partial epoxy primer paint job, new carpet with Thermo-tech sound/heat mat and new, recovered seats it's getting close to a finish paint job.
Ok darn it. I'm new and apparently not enough post to enter and didn't use the right form/forum! Aw well, here's my XJ just for sheets and giggles.
Hmmmm.... doesn't say anything about that in the COTM rules....
