Daniel Loudin

SO MY QUESTION IS.. CAN I USE THE CARDAN FROM XJ FRONT DRIVESHAFT ON A TJ FRONT? All i would be using is CV.

DJeXeCute

I believe 1994-2001 XJ Cherokees 1994-2003 Grand Cherokees 1997-2005 Wrangler TJ's with the Dana 30 from axle are identical as far as internals. As long as the shafts are 27 spline on the XJ and the TJ it will work.

DJeXeCute

1984-1993 wont work because they still used the two piece vacuum disconnect axles I believe

DJeXeCute

Wait you mean the driveshaft from the tcase to the axle. I have no clue i would think the TJ's is shorter

Waterlogd2005

A Cardan Joint and a CV (Constant Velocity) are two different things. The upper drive shaft contains a Double Cardan Joint. CV joints are found on the axles. Early Cherokees don't have CV joints. A Cardan Joint is simply a Universal Joint (U joint). A CV joint slides inside the joint to maintain the same acceleration and torque through the bend and is most often covered with a rubber boot to keep the dirt out.

XJwonders

00-01 XJ, 93-98 ZJ, 97-06 TJ axles are identical (LP axles). 99-04 WJ front axles are still LP but wider.