78 GMC k25 Lift
#16
Member
Thread Starter
Join Date: Feb 2014
Location: Victoria Texas
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
#18
Member
Thread Starter
Join Date: Feb 2014
Location: Victoria Texas
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
oh i knows this lol, I wasnt planning on doing the swap for awhile but the motor blew up on me long story unfortunate event, it has been a challenge with it lifted you are exactly right would be way easier!
#22
Seasoned Member
Join Date: Jul 2013
Location: Atlanta
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Noticed you had it on the smaller tires when doing the engine swap... Guessing there were problems. =P
#23
Member
Thread Starter
Join Date: Feb 2014
Location: Victoria Texas
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
#24
Member
Thread Starter
Join Date: Feb 2014
Location: Victoria Texas
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
#27
Member
Thread Starter
Join Date: Feb 2014
Location: Victoria Texas
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Ordered a new alum intake, holley 670 street avenger, holley performance fuel pump, headman headers
Just have to take the time to clean up the engine compartment and paint the frame then the motor goes in hopefully soon, new inner fenders, pricing outer fenders, and plan on buying a billet grill soon.
#29
Member
Thread Starter
Join Date: Feb 2014
Location: Victoria Texas
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Ended up taking the zz4 motor to the shop...got new crank bearings,new cam bearing, piston rings, cleaned up and cleaned out, valve job, had to deck the heads, all new seals and gaskets, and everything cleaned up...didnt plan on doing that till I checked some tolerances and im glad I did... made some progress got the motor back in 5 working days and installed it in the truck...I killed all the rust on the frame with OSPHO, going to finish painting the frame and underside of the truck this weekend. going to assemble the accessories on the motor and put on the headers ect and put on the 2inch body lift i bought.. this is where im at....