xj stock front bumper trim and mod
#1
Newbie
Thread Starter
Join Date: Sep 2010
Location: Franklin, PA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L I6 MPI HO
xj stock front bumper trim and mod
I was looking at 4x4 bumpers online for my XJ and decided I didn't really like the look of them, not to mention the price. Over 400 bucks for 5 foot of steel. That's messed up! Even including fab.
So here's my project
1: removed stock bumper plastics. (no need to remove whole bumper) There's 8 bolts holding the bumper caps on and 3 pain in the butt rivets holding on the center strip of plastic, I just cut that plastic out instead of trying to pull the rivets.
2:I taped off the angles I wanted the bumper caps to be, then using my awesome homemade heat-knife (BIC lighter-Utility blade), I cut the plastic. This was all way easier then I thought it was going to be.
3: Sand down the edges
4: Bolt back on
After all this I want to put tow hooks through the front and rear stock bumpers.
So here's my project
1: removed stock bumper plastics. (no need to remove whole bumper) There's 8 bolts holding the bumper caps on and 3 pain in the butt rivets holding on the center strip of plastic, I just cut that plastic out instead of trying to pull the rivets.
2:I taped off the angles I wanted the bumper caps to be, then using my awesome homemade heat-knife (BIC lighter-Utility blade), I cut the plastic. This was all way easier then I thought it was going to be.
3: Sand down the edges
4: Bolt back on
After all this I want to put tow hooks through the front and rear stock bumpers.
Thread
Thread Starter
Forum
Replies
Last Post
RunnerInPink
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
25
10-10-2017 10:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)