Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

XJ seats in a WJ

Thread Tools
 
Search this Thread
 
Old Jul 23, 2014 | 06:47 PM
  #1  
dave1123's Avatar
Thread Starter
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 741
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default XJ seats in a WJ

I've got a problem with my butt getting sore in my WJ because of the design of the seat with it's thigh bolsters and kidney supports. I never had this problem with my ZJ and was wondering if the high-backed seats from an XJ would fit in it. The reason I said XJ is because my WJ doesn't have power seats and most ZJs I've looked at do. I found a nice pair in a '97 XJ at pick&pull but they won't be there long. They only want $15 each for them.

I asked at the dealer about the fit and they said no because they changed the floor pan. Yeah, they made it wider, so what. I was at the yard for some other parts and didn't have a tape measure with me, but the '03 WJ right beside it had the seats removed and the bolt pattern looks the same.

I just wondered if anybody knows for sure. I'm tempted to just grab them anyhow and do what I have to to mount them.
Reply
Old Jul 23, 2014 | 09:03 PM
  #2  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

I'm pretty sure those XJ seats will fit, you might have to swap the brackets.
Reply
Old Jul 24, 2014 | 09:48 AM
  #3  
dave1123's Avatar
Thread Starter
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 741
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

I don't know, Busted. I just got back from Pick&Pull and it doesn't look like they're even close! The bolt pattern is very close, but the XJs carriage and tracks are totally different. The floor pan has a large bulge in it to clear the transfer case and the WJ doesn't, so the mounting for the XJ is way off center. If I bolted them in I'd have to remove the console and then I wouldn't be sitting behind the wheel! I guess I'll just have an upholstery shop recover the seat so it's flat. I can deal with the kidney supports.

I could see if the XJs upper would fit on the WJs carriage, but I'd have to buy one of both to mess around with so I can still drive this thing in the meantime. At the moment, this yard only has one WJ and somebody already took the driver's seat. What I found amusing is it's a 4.7 and someone took one head.
Reply
Old Jul 24, 2014 | 12:15 PM
  #4  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

Will the seat base unbolt from the WJ seay and bolt onto the XJ seat?
Reply
Old Jul 24, 2014 | 12:21 PM
  #5  
DieselD's Avatar
CF Veteran
 
Joined: Apr 2011
Posts: 4,825
Likes: 2
From: Indianapolis
Year: '99 and '91
Model: Cherokee
Default

People have swapped WJ seats into XJs by switching the seat brackets I don't see why the reverse can't happen. The XJ seats (I believe) are more narrow than WJs so I don't think there would he any problem with the center console.
Reply
Old Jul 24, 2014 | 06:18 PM
  #6  
dave1123's Avatar
Thread Starter
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 741
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

Originally Posted by Bustedback
Will the seat base unbolt from the WJ seay and bolt onto the XJ seat?
I really don't know but I'll assume it will, but as I said, I need to drive my WJ while I figure it out. The problem is the XJ base is not centered under the seat cushion and the mounting bolts are closer to the door than they are in the WJ. I saw an XJ in the yard with the WJ style seats in it, but I don't know what year it was because most of the front end and driver's door were missing. It was a Cherokee Sport. They also had the XJ base.

And I thought this would be easy. Oh, wait! this is a jeep after all.
Reply
Old Jul 24, 2014 | 07:29 PM
  #7  
DieselD's Avatar
CF Veteran
 
Joined: Apr 2011
Posts: 4,825
Likes: 2
From: Indianapolis
Year: '99 and '91
Model: Cherokee
Default

I would try making it work in the JY. Take an XJ seat out, bolt WJ brackets on it and see if it fits in a WJ at the JY then there'd be no experimenting with your ride until you know it will work.
Reply
Old Jul 24, 2014 | 10:36 PM
  #8  
BatmanXJ's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,249
Likes: 12
From: Hamburg AR
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Default

Un bolt the 4-13mm bolts holding the seat to the track and swap them. It will work. They may sit about 1inch shorter in your WJ tho. I know my WJ seats in my XJ sit about 1 inch taller.

WJ seats are way better than XJ seats.

Needs to be 95+ XJ

Last edited by BatmanXJ; Jul 24, 2014 at 11:22 PM.
Reply
Old Jul 24, 2014 | 11:16 PM
  #9  
DieselD's Avatar
CF Veteran
 
Joined: Apr 2011
Posts: 4,825
Likes: 2
From: Indianapolis
Year: '99 and '91
Model: Cherokee
Default

95+ I believe, my 91 seat brackets aren't like my 99 or the 95 parts jeep.
Reply
Old Jul 24, 2014 | 11:22 PM
  #10  
BatmanXJ's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,249
Likes: 12
From: Hamburg AR
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Default

Originally Posted by DieselD
95+ I believe, my 91 seat brackets aren't like my 99 or the 95 parts jeep.
Correct 95+ my bad I should have read my post
Reply
Old Jul 24, 2014 | 11:29 PM
  #11  
DieselD's Avatar
CF Veteran
 
Joined: Apr 2011
Posts: 4,825
Likes: 2
From: Indianapolis
Year: '99 and '91
Model: Cherokee
Default

Its all good.
Reply
Old Jul 25, 2014 | 06:54 AM
  #12  
dave1123's Avatar
Thread Starter
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 741
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

Now why didn't I think of that? I could do it with the passenger's seat in the JY! There is only one WJ there and the driver's seat is already gone. Thanks, sometimes you need another head in the think tank. If it doesn't rain, I'll go back tomorrow. BTW, the seat mounting bolts in the WJ are 15mm and in the XJ are 5/8.

For most people the WJ seats are better, but not for a 70 year old man who's 5'6" and 254 lbs with a wide butt! I also have a pinched nerve in my hip. The other problem I have is when I deliver my newspapers, I can't slide over against the door panel to reach some of the mailboxes. I could in my ZJ.

The left side thigh bolster is crushing from getting in and out of my WJ and I find this is a common problem with them. That's probably why the '02 in the yard is missing the driver's seat.

Last edited by dave1123; Jul 25, 2014 at 06:58 AM.
Reply
Old Jul 25, 2014 | 07:02 AM
  #13  
BatmanXJ's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,249
Likes: 12
From: Hamburg AR
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Default

Originally Posted by dave1123
Now why didn't I think of that? I could do it with the passenger's seat in the JY! There is only one WJ there and the driver's seat is already gone. Thanks, sometimes you need another head in the think tank. If it doesn't rain, I'll go back tomorrow. BTW, the seat mounting bolts in the WJ are 15mm and in the XJ are 5/8.

For most people the WJ seats are better, but not for a 70 year old man who's 5'6" and 254 lbs with a wide butt! I also have a pinched nerve in my hip. The other problem I have is when I deliver my newspapers, I can't slide over against the door panel to reach some of the mailboxes. I could in my ZJ.

The left side thigh bolster is crushing from getting in and out of my WJ and I find this is a common problem with them. That's probably why the '02 in the yard is missing the driver's seat.
Seat to tracks are 13mm on both. I wasn't refering to removing tracks from the jeeps. I left tracks in the donor vehicle and just removed seat from the tracks.
Reply
Old Jul 25, 2014 | 07:28 AM
  #14  
dave1123's Avatar
Thread Starter
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 741
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

Thanks again. I'll just have to stand on my head!
Reply
Old Jul 25, 2014 | 07:44 AM
  #15  
BatmanXJ's Avatar
CF Veteran
 
Joined: Feb 2012
Posts: 1,249
Likes: 12
From: Hamburg AR
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Default

Originally Posted by dave1123
Thanks again. I'll just have to stand on my head!
Lol it wasn't that bad. Actually ended up my only option. I couldn't get either driver side doors open. I was 350lbs at the time.
Reply



All times are GMT -5. The time now is 08:12 AM.