We replaced ignition switch
#1
Newbie
Thread Starter
Join Date: Nov 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
We replaced ignition switch
We replace the ignition switch and now there's a light on the dashboard with a line through it and the jeep won't start. Is there a pass lock disarming procedure than anyone knows it's an O2 Jeep Grand Cherokee.
#2
Old fart with a wrench
Welcome to CF!
You have a vehicle with a security key module that will only allow a start with a key it recognizes. Your new key must be programmed to the code the module recognizes. Now that you've changed the key tumbler, it has to be programmed by the dealer.
You have a vehicle with a security key module that will only allow a start with a key it recognizes. Your new key must be programmed to the code the module recognizes. Now that you've changed the key tumbler, it has to be programmed by the dealer.
Thread
Thread Starter
Forum
Replies
Last Post
Larry383
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
12-09-2015 11:30 PM
jp1017
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
11-05-2015 06:04 PM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-05-2015 09:41 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)