tools
06-30-2016, 01:47 PM
#1
Newbie
Thread Starter
Join Date: Jun 2016
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
tools
what size socket/wrench do I need to remove front caliper and mount(knuckle) on my 2001 Jeep Grand Cherokee? I eventually need to access and replace broken wheel studs.
06-30-2016, 02:39 PM
#3
Old fart with a wrench
The caliper slide pins are 7mm Allen. You can pull the whole shooting match off with just the mounting bracket bolts. I think they are 12-point bolts so you need at 12-point wrench or socket, but I may be thinking about the hub bolts. They are freaking tight, BTW! DO NOT LET THE CALIPER HANG ON THE HOSE!! Use a wire hook and hang it on the spring.
Thread
Thread Starter
Forum
Replies
Last Post
wanna-be-a-wheeler
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
04-02-2016 12:15 PM
BigC9164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
04-01-2016 06:53 PM
wader218
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
03-22-2016 06:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)