Stuck: (WJ) Removing the track bar
#1
Newbie
Thread Starter
Join Date: Aug 2015
Location: Weatherly PA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Grand Cherokee
Stuck: (WJ) Removing the track bar
Hi All,
I'm in the process of installing an IRO 3" Lift kit on my 2000 WJ
I have the axle side bolt out and now working on the frame side bolt.
The problem is the bump stop is in my way so I can't fully pull the bolt out of the sleeve.
Is there an easy way to get the bump stop out of my way?
I looked around to see if there are any bolts holding the 'cup' in place but didn't see anything. Is it as easy as prying the rubber out?
-mike
I'm in the process of installing an IRO 3" Lift kit on my 2000 WJ
I have the axle side bolt out and now working on the frame side bolt.
The problem is the bump stop is in my way so I can't fully pull the bolt out of the sleeve.
Is there an easy way to get the bump stop out of my way?
I looked around to see if there are any bolts holding the 'cup' in place but didn't see anything. Is it as easy as prying the rubber out?
-mike
#3
Old fart with a wrench
I believe the bump stop just presses in the frame bracket. That one looks like a polyurathane one. Mine are black rubber.
Thread
Thread Starter
Forum
Replies
Last Post
'90Cherokee
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
11-12-2015 10:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)