Good day jeepers,
Need assistance,
2001 grand Cherokee laredo,
Non modified,
I am going to blame the squirrels....
4 harnesses, ABS module, purge module, ldp module, complete harness from inside firewall to computer, also front head lights, new vacuum to ldp, purge, canister, tank....
Enough said?
Down to the illusive 1495, OMG code.
The ldp(old) was destroyed and trashed, now the two new ones I have all are 4 prong/3 wire connections. I have a 4 prong 2 wire connector. Does not fit the ldp,
Researched the site and found the pinout for the 3 wire. Nothing on the 2wire.
No voltage showing on the 2 wire, should be a standard 11-13.x voltage at start to actuate the pump. Nothing.....
The 3 wire shows a voltage feed wh/blue with pressure sense on one side, purge signal on other.
How do I make the 3 wire connection work on the 2 wire harness?
Your assistance would be greatly appreciated...