Solenoid wire connector broken
#1
Newbie
Thread Starter
Join Date: Jan 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Solenoid wire connector broken
I have a 2009 Grand Cherokee Laredo and the connector from the ignition wire to the solenoid does not stay clipped on is it easier to replace the wire or put on a new connector?
#2
Old fart with a wrench
My opinion is to go to the dealer and get a new connector.
#3
CF Veteran
the wire isn't clipped on, there is a 5/16 nut on it.? Tighten the nut.
Tuesday I put a new starter on, the solenoid on the new starter was turned around half way from where the oe was and the harness wouldnt fit.
Cut it in half with a tin snips and all good.
Tuesday I put a new starter on, the solenoid on the new starter was turned around half way from where the oe was and the harness wouldnt fit.
Cut it in half with a tin snips and all good.
Thread
Thread Starter
Forum
Replies
Last Post
Ralph77
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
09-14-2020 01:45 AM
BasicXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
01-23-2018 08:16 PM
GeneXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-13-2016 09:14 PM
Riley Thomas Greiner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
10-05-2016 08:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)