Rear Wiper
#1
Newbie
Thread Starter
Join Date: Mar 2018
Location: Dutchess County NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2003
Model: Grand Cherokee(ZJ)
Engine: 4.7
Rear Wiper
My rear wiper on my 2003Grand Cherokee was barely working, so I bit the bullet and ordered a new on on RA and replaced it. Now nothing happens, and I have checked the fuses. There is that relay in the fuse box next to the battery, has anyone seen that go bad? or have any other thoughts?
Thanks,, Brian BTW
Thanks,, Brian BTW
Last edited by A6USMC; 03-16-2018 at 08:00 PM.
#2
Newbie
Thread Starter
Join Date: Mar 2018
Location: Dutchess County NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2003
Model: Grand Cherokee(ZJ)
Engine: 4.7
Checked out all fuses under dash and hood and all are good. I can't believe I got a defective new motor, so I guess it leaves me with either the harness or column wiper control. If anyones knows of a delay relay or other control for the rear wiper, please chime in as this is starting to kick my but. Just to keep my hands on her, her left front caliper crapped out yesterday and caused an almost no brake ride home for several miles I broke down and got on the RA website again and ordered an all new front and rear caliper, rotors and pad kit,,, https://www.rockauto.com/en/moreinfo.php?pk=6516000&cc=1416136&jsn=411 It should be here by the weekend and I'll let you all know how I like it. Any help on the rear wiper would be appreciated. Thanks,,, Brian
Last edited by A6USMC; 03-13-2018 at 07:40 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Freda L. Worley Harris
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
02-15-2020 04:37 PM
goneboggin
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
10-03-2014 12:41 PM
Kaktus
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
10-20-2013 02:41 AM
xj_kid
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-07-2010 07:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)