Hi all, i had a code set in awhile back and had a smoke test done and they replaced the LDP, they said it was bad. They also repaired some rubber lines.Basically they tested the whole emissions, and repaired what was bad. So now i have another code set in P0441 (irregular purge flow) after doing some research i came across an image of the purge selenoid, Well i looked under the hood and noticed mine is upside down, leaving me to think they reinstalled it wrong after testing the system. could this be causing the po441 code? its an easy fix, so before i turn it right side up i just want to make sure if it matters, it is kinda obvious that its upside down due to it saying bottom which is looking at you. Thank You!

 

I'd say turn it around and see if your code stays off.