po codes po132 & po138
#1
Newbie
Thread Starter
Join Date: May 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
po codes po132 & po138
I replace sensors 3 time already with oem parts, works fine for about two weeks then ck engine come back on, what could be my problem for the sensors to keep going bad .
thanks for any replys
thanks for any replys
Last edited by 2000 laredo; 05-25-2011 at 07:23 AM.
#2
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
You need a scan tool to properly diagnose the problem by following a troubleshooting tree. As you can see, throwing new and expensive sensors at it is not fixing the problem. P0132= Check the wiring (green/red wire) between the o2 sensor and PCM for a short to voltage. P0138= Check wiring (black/dark green) between o2 sensor and PCM for shorts to voltage.
Last edited by Bustedback; 05-25-2011 at 09:27 AM.
Thread
Thread Starter
Forum
Replies
Last Post
4WD4EVER
Modified XJ Cherokee Tech
28
07-28-2023 07:12 PM
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
dennismo
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
04-15-2018 05:57 PM
tleed
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
10-04-2015 01:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)