Overhead console blank
#1
Member
Thread Starter
Join Date: Dec 2014
Location: Ct
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0
Overhead console blank
So looking for opinions my 04 WJ overhead console never worked, the guy I bought it from said one day it never came on so I figured it just crapped out. I checked all the fuses and all good. figured I just buy a used one. I did swapped it in and nothing and being optimistic I thought ooo man!! It's defective so got another one still nothing.. I checked the bulbs for the screen all good, I got onto Wjjeeps website and got the wiring diagram and its not getting power to the display? The sunroof and lights work fine but not the display?? I'm at a lost any opinions would be appreciated. Thank you
#2
Old fart with a wrench
Supposedly, there are fuses in the under-dash junction block that supply power to the EVIC. Did you check those? Fuses 8 and 22.
Last edited by dave1123; 02-29-2016 at 10:00 AM.
#3
Member
Thread Starter
Join Date: Dec 2014
Location: Ct
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0
#4
Old fart with a wrench
Okay, in the wiring harness on the back of it, there should be 2 power sources. One is hot all the time and one is hot with the key on. Check for power up there. The hot one should be for the overhead lights and the key controlled one is for the EVIC power. The data comes from the BCM thru the data buss.
#5
Member
Thread Starter
Join Date: Dec 2014
Location: Ct
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0
Okay, in the wiring harness on the back of it, there should be 2 power sources. One is hot all the time and one is hot with the key on. Check for power up there. The hot one should be for the overhead lights and the key controlled one is for the EVIC power. The data comes from the BCM thru the data buss.
#6
Member
Thread Starter
Join Date: Dec 2014
Location: Ct
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0
[QUOTE="cherokeexj21;3220568"] so I checked the black rectangle plug and I'm not getting power to either wire and sometimes my overhead lights will work whenever they want, I try to turn them on and nothing and a few minutes later they'll come on but they will always shut off when I want them to.. Sunroof works fine as well
Trending Topics
#8
Member
Thread Starter
Join Date: Dec 2014
Location: Ct
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0
So when I was checking the wires I noticed finger marks around the sunroof rubber and seal looks like someone probably took out the headliner to do something to the sunroof in the past so maybe when they put the headliner back in they pinched something or never connected the ground. I'm gonna take it down and check everything this weekend and let you guys know.
#11
Member
Thread Starter
Join Date: Dec 2014
Location: Ct
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0
Ok so harness is fine dropped the headliner and also checked the harness for the my hvac blend door motor and that has zero power as well..... I'm at a lose... Help!
#12
Old fart with a wrench
The blend door motor only gets power when it's asked to move, as in changing it's position. It's a stepper motor that only moves a certain amount of angle determined by the pulses sent to it by the hvac controller. It MAY have constant power and the controller acts as a ground, IDK. That's the way the fuel injectors function. The PCM controls mixture by the length of time the injector is "on", or grounded.
MHO is you've got a loose connector somewhere. I think the harness goes up the driver's windshield pillar. Do you have lighted vanity mirrors and do they work? I think only the passenger's side is lighted.
MHO is you've got a loose connector somewhere. I think the harness goes up the driver's windshield pillar. Do you have lighted vanity mirrors and do they work? I think only the passenger's side is lighted.
#13
Member
Thread Starter
Join Date: Dec 2014
Location: Ct
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0
The blend door motor only gets power when it's asked to move, as in changing it's position. It's a stepper motor that only moves a certain amount of angle determined by the pulses sent to it by the hvac controller. It MAY have constant power and the controller acts as a ground, IDK. That's the way the fuel injectors function. The PCM controls mixture by the length of time the injector is "on", or grounded. MHO is you've got a loose connector somewhere. I think the harness goes up the driver's windshield pillar. Do you have lighted vanity mirrors and do they work? I think only the passenger's side is lighted.
#15
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
You may not like this but here is what I would with mine an 04 WJ Overland...It's time to take it to the dealership or at least a shop who knows about the electronics in these Jeep products.
I know dealership rates are high but when it comes to this sort of things I would go that route, I know also Dave would fix it if at all possible lol.
I know dealership rates are high but when it comes to this sort of things I would go that route, I know also Dave would fix it if at all possible lol.