Motor mount questions?
Thread Starter
Newbie
Joined: May 2016
Posts: 3
Likes: 0
Model: Cherokee
Motor mount questions?
I have a 2001 grand Cherokee that blew a rod so I went out and bought a engine out of a 1995 Cherokee everything was fine until I went to put it back inside the jeep and my 2001 engine mount don't fit on the 95 engine I bought
Are there any ways around this? And or and interchangeable parts from a different model and year jeep?
I could use the help thanks
Are there any ways around this? And or and interchangeable parts from a different model and year jeep?
I could use the help thanks
Old fart with a wrench
Joined: Nov 2010
Posts: 14,398
Likes: 741
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Welcome to CF!
The engine mounting bolt bosses were moved on the 99 and up block. You may find aftermarket mounts that fit it, but they are a compromise at best. You may have to remote the oil filter. You don't have the bolt bosses for the coil pack on the head either. Also, your 2001 exhaust manifolds won't fit it.
The engine mounting bolt bosses were moved on the 99 and up block. You may find aftermarket mounts that fit it, but they are a compromise at best. You may have to remote the oil filter. You don't have the bolt bosses for the coil pack on the head either. Also, your 2001 exhaust manifolds won't fit it.
Thread
Thread Starter
Forum
Replies
Last Post
joe976
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
Apr 3, 2016 04:47 PM
Tracy Gillum
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
Mar 30, 2016 05:17 PM
dkmcgowan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Mar 25, 2016 04:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)