Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

have a vibration at speed

Thread Tools
 
Search this Thread
 
Old Mar 2, 2015 | 04:05 PM
  #1  
jeepgrandltd99's Avatar
Thread Starter
Junior Member
 
Joined: May 2012
Posts: 45
Likes: 0
From: niles mi
Year: 99
Model: Grand Cherokee
Engine: 4.7
Default have a vibration at speed

I've got a 2004 grand Cherokee limited all wheel drive what it will do it start to vibrate,like a bad u joint but there not bad the steering will shake a little bit round 60. It will also sound like a set of rumble strips every now and then. Steering will pull a little left when I hit a puddle that I think could be ball joints possibly going bad. Any input would be helpful.
Reply
Old Mar 2, 2015 | 06:04 PM
  #2  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

Have the tires inspected and balanced. Pulling while going through a puddle is pretty normal depending on how deep the puddle is.
Reply
Old Mar 2, 2015 | 09:18 PM
  #3  
rangermonroe's Avatar
Seasoned Member
 
Joined: Dec 2010
Posts: 350
Likes: 0
From: Georgia, USA
Year: 1994
Model: Grand Cherokee
Engine: v8
Default

Tag.

I have a similar Gremlin.
Reply
Old Mar 15, 2015 | 06:23 PM
  #4  
Absosecur's Avatar
Newbie
 
Joined: Oct 2013
Posts: 24
Likes: 0
Model: Cherokee
Default

When I bought mine I had the same problem. Mine has a long travel kit on it and I thought u-joints but they were good. What I found was this. I forgot what they are called but where front and rear drive shafts meet the transfer case there are actually two u joints close together in a device that helps take the stress off the angle of drive shafts on lifted rides. This thing actually has a ball and pin type guide in the middle of it that has to be greased with a needle type greaser. It will wear out and on mine at 60 mph it felt like something was about to explode. I found someone to rebuild those and it took all the vibration out and it drove sweet after that. Hope that helps.
Reply
Old Mar 16, 2015 | 10:06 AM
  #5  
dave1123's Avatar
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 741
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

That's called a double-carden joint and it makes sense.
Reply
Old Mar 16, 2015 | 05:01 PM
  #6  
ZJMAX's Avatar
Seasoned Member
 
Joined: May 2014
Posts: 375
Likes: 3
From: Nor Cal
Year: 1993 & 1994
Model: Grand Cherokee
Engine: 4.0
Default

Is it stock height or lifted? Also are all the tires the same brand, size, and same amount of tread wear?

Max
Reply
Old Mar 16, 2015 | 07:48 PM
  #7  
jeepgrandltd99's Avatar
Thread Starter
Junior Member
 
Joined: May 2012
Posts: 45
Likes: 0
From: niles mi
Year: 99
Model: Grand Cherokee
Engine: 4.7
Default

Problem solved it was the transfer case going out. Thanks for all the sound advise though
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
May 5, 2024 12:21 PM
toasterknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
May 21, 2016 07:03 AM
ROCKRIDGE 4WD
Vendor Showcase
1
Apr 7, 2016 06:06 PM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM
kend3031
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Sep 30, 2015 08:15 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:59 AM.