front coils
09-23-2011, 08:14 AM
#2
Senior Member
Join Date: Oct 2009
Location: NW Florida
Posts: 537
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Grand Cherokee
Engine: 4.0
I left mine attached when I pulled/installed mine. I jacked up the opposite side of the axle, stepped down on the low side, and used coil spring compressors.
edit - Actually with stock coils, you shouldn't even need the compressors. I used them because I was installing 2" pucks, so I needed a little more room.
edit - Actually with stock coils, you shouldn't even need the compressors. I used them because I was installing 2" pucks, so I needed a little more room.
Last edited by 4Doors; 09-23-2011 at 08:17 AM.
09-23-2011, 08:39 AM
#3
CF Veteran
Thread Starter
Join Date: Nov 2009
Location: Dallas, GA 30157
Posts: 1,438
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Grand Cherokee
Engine: 4.0
Thanks, I've got the axle out from under it now and it'll be much easier to
replace with the springs out.
need to install pucks -- later
It's back together. Just have to tighten everything up, once it's sitting on all fours.
replace with the springs out.
need to install pucks -- later
It's back together. Just have to tighten everything up, once it's sitting on all fours.
Last edited by PatriotGT; 09-23-2011 at 12:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)