Greybush

looking for a good front and rear bushings set anybody know of some good shopping places

blackjack12982

Could you be a little more specific? Front and rear bushings?

Bustedback

You're better off replacing the whole arm, unless you have custom arms or long arms.
www.quadratec.com ,ebay, NAPA for complete arms. www.energysuspension.com if you want poly bushings in the stock arms, but they may limit flex and cause a harsh ride though.

Greybush

I have a rubicon express lift and was looking for bushings that are on the front axle that the control arms hook to any ideas

blackjack12982

Superflex or Superride?

Greybush

i have to super flex with both upper and lower control arms replaced for front and rears

blackjack12982

Uppers-

http://dirt-fab.3dcartstores.com/Sup...all_p_169.html

Lowers-

http://dirt-fab.3dcartstores.com/Sup...rge_p_170.html

I just bought a set of Superride replacement bushings from them yesterday. I don't know anything about the quality until they show up. It took me a heck of a time to even find that store that sells replacement bushings for the RE arms. Most people told me I was SOL, because RE used a size all to themselves.

Greybush

i think im confusing you all, on the front end on top of it there are two bushings you upper control; arms bolt up to from off the body there's one on the driver side and one on the passenger side i was looking to see if anybody knew where i coould get them individually at the only ones ive found are for oe replace

blackjack12982

I've read this at least 4 times and I still can't even understand half a sentence of what you attempted to say.

Greybush

front axel has bushings on the top where the upper control arms connect in looking to get just those

Bustedback

AutoZone will have those two bushings in poly or rubber.